TIS-Draftsman
 

  Home | About | Lisp Link | Free Resources | TIS.Pirce | Drafs Technical

 

Project Processes
Drawing Planning
File name
Layers setting
General Layer
Architectural Layer
Civil Layer
Electrical Layer
FirePro.Layer
Mechanical Layer
Sanitary Layer
Structural Layer
Telecom Layer
Text Setting

 

Free Autolisp

2D_Draw.zip Bisect.lsp.....Bisects an Angle 
Center.lsp... Creates center lines for multiple holes.
Eg.lsp...........Makes a box with diagonals, for depicting lumber cross-section, etc. 
Grass.lsp......Draws row of grass with random height, spacing and angle in elevation .
Star.lsp.........Draws a Star.
Vpline.lsp.....Draws multiple lines from a vanishing point to designated points file contains 2d drawing routines.
Modify.zip Aar.lsp...........Angle array routine, much easier than autocad array.
Adver.lsp.......Inserts a vertex in a polyline.
Breakint.lsp...Breaks line at an intersection.
Cm.lsp...........Multiple copy at angle.
Clone.lsp.......Copies selected objects to another specified layer.
Cpr.lsp...........Copies and rotates at the same time.
Offset.lsp.......Improved offset command (offsets to current layer).
Prmatch.lsp...Changes the property of a set of objects to match those of another object.
Wid.lsp .........Changes the width of lines, arcs, and polylines. file contains lisp routines to modify, copy, array. etc. entities in the drawing.
Block.zip Group.lsp.......Groups objects into blocks. Type group or ungroup to use.
Inagin.lsp........Inserts same block again.
Replace.lsp.....Replaces Blocks
Scex.lsp ..........Explodes blocks that were not uniformly scaled when inserted. file contains block manipulation routines.
Layer.zip Cl.lsp ............Changes Layer using a Target Object
Clone.lsp.......Copies selected objects to another specified layer.
Fl.lsp.............Freezes a layer you pick from the screen.
Ml.lsp ...........Makes a new layer and asks for the color.
Mlf.lsp...........Freezes multiple layers, do your work, thaw them with mlt.
Sl.lsp ............Sets A layer you pick to the current layer. 
Store.lsp........Routine to save layer settings into a script file. Run script to restore.
file contains layer manipulation routines.
DWGinfo.zip Ddlist.lsp.....List command in dialog box for R12. Needs ddlist.dcl
Abl.lsp.........Angle between two lines.
Atd.lsp........Converts Engineering or Architectural Units to Decimal Inches.
Atdf.lsp.......Converts Engineering or Architectural Units to Decimal Feet.
Ate.lsp........Converts Architectural Units to Engineering Units.
Eta.lsp........Converts Engineering Units to Architectural Units
Dq.lsp.........Gives a quick measurement between two parallel lines.
Lq.lsp..........Displays selected entity data at the command line.
file contains files to obtain and convert drawing information.
3D.zip Conver.lsp.....Converts extruded lines into 3D faces.
Spiral.lsp.......Draws 3D spiral file contains 3d drawing routines
Test.zip Timeit.lsp.......Times a command and writes it to a file.
contains files for testing your computer and autocad.
ACMSlsp.zip As.lsp................2D Architectural routine for design aid in space allocation. Writes width, length and area to screen.
Da.lsp................Running distance calculator from point to next point. to next point. to next etc.
Dn.lsp................Running distance calculator from first point, to next point, first point to next point etc. 
Fdn.lsp..............Simple 3D routine to construct a 3D Foundation converting 3D lines on a unique layer to 3D faces.
Pitch.lsp............Converts roof pitch in degrees to inches rise/inches run and the reverse.
Roofcalc.lsp......Calculator that when given the roof pitch and either the Run, Rise, or Slope, will return other two variables.
Roofcomp.lsp....2D, 3D, roof calculator to accurately determine facia and ridge location from dependent variables.
Ucsline.lsp .........Sets the ucs to a line with thickness for 3D Drawing. file contains routines that have been written by Mike Grisez at A.C.M.S. Most of them are related to Architecture and 3D Modeling. As we have used many of your routines we hope that you may find some our routines helpful to you.
Sectcut.exe none note Sectcut.exe is a self-extracting zip file containing SectionCut.lsp and associated files for drawing section markers.
Purge.zip none note Ddpurge.lsp allows purging of items in the drawing via a dialog box.
Cloud.zip none note Cloud.zip offers two routines that draw revision clouds. Cloud1.lsp draws by defining a rectangle. Cloud2.lsp draws by freehand sketch.
Dpmt2t.zip none note Dpmt2t.lsp converts mtext to single line text. For use in IntelliCAD® only.
Tx2mtx.zip none note Tx2mtx.lsp converts single line text to mtext.
Mt2file.lsp none note Mt2file.lsp sends mtext out to an ascii file for editing in your favorite text

Hosted by www.Geocities.ws

1