Material & Features

Welcome to the website of Liverpool Boat Company Ltd

Materials and Features used / Prices and sizes / Specification of Boats / Shell Design / Finding Us / Boat Launching / Steps In Building Vessel / Finished Vessels / Engine Types

 

Liverpool Boats Home

 

Layouts and Design

Prices

Specification of Boats

Shell Design

Finding Us

Boat Launching

Steps In Building Vessel

Finished Vessels

 

 

 

 

 

 

 

Steel Specification

 

Hull
Base Plate 10 mm
Sides 6 mm
Knees and Stringers 50 x 50 x 5 mm Angle
Floor Bearers 50 x 50 x 5 mm Angle
Rubbing Strakes 50 x 12 mm Half round

 

Cabin:
Sides  4.5 mm

 

Roof:
4 mm on 40 mm flats

 

Bulkheads
4 mm Steel plate

 

Doorway Apertures
50 mm x 4 mm Flats on edge

Forward doors is central to bulkhead.

 

Principle Features On All Boats

Fuel Tank Approx 40 gallons, drain and vent.
Fresh Water Tank Approx 150 gallons, built into foredeck with filter vent, and bolted inspection hatch.
Gas Locker Self draining and vented locker, space for 2 x 13 kg bottles.
Weed Hatch Complete with quick release cover.
Deck Fittings One rope, stud forward, 2 bollards aft./
Decks All self draining.
Windows Apertures Cut to customers specification
Engine Beds Supplied to suit choice of engine.
Stern Tube Fitted to suit 1 1/2 diameter shaft.
Engine Cooling Skin tank.
Rubbing Strakes One full length, plus quarter lenght welded top and bottom.
Hand Rail Semi and traditional boats have intergrated hand rails on the coach roof with drainage points. 

Cruiser boats have 1 1/4 tubular handrails fitted.

Pole and plank rack
Centre mooring ring on roof

 

 

Click here to view the latest Isuzu engines

Liverpool Boats is the largest narrow boat building company in the uk and has build over 1000  vessels since 1978

Hosted by www.Geocities.ws

1