TIGHT TURNS SERVO STEERING MOD
PART 2
Remove drive shaft.
Lift the motor clip up. You will see the motor mount screws.
Remove both the motor mount screws.
Remove the motor by disconnectiong the motor connector. Just push down on the lever at the top of the connector and pull the 2 connectors apart.
Remove the motor and set it a side.
Click here to go to
PART 3
INSTALLATION GUIDE
OVERVIEW
CLICK LINKS
PART 1 PART 3
PART 2
PART 4
PART 5
CLICK HERE TO VIEW MY
EBAY AUCTIONS
If you have any questions, please email me.
[email protected]
Hosted by www.Geocities.ws

1