TUTORIAL
"Ruby"
By: Maggie Santiago
Part 7
1. Start about 1� inches from the end of the wire, turning the long piece of the wire to the front of the pliers; make a loop {one complete circle}.
2. Working on the long piece of the wire; pinch a little less than � of an inch and bend to the back.
3. Press it down at the top, roll the top to the right just a little bit. You are rolling two wires together (picture #1)
4. Working on the back of the wire; grasp it at the top and bend it up and to the left and to the back of the �R� you should have a �P� (picture #2).
5. Grasp the wire in the cross of the �R� inside loop ( picture #3) and bend down
6. Grasp the wire at the bottom (even with the other side of the �R� )and bring it up
7. Grasp the wire at the middle of the �R� and bring it to the back and dowun, pinch a little at the top
8. Grasp the two wires at the bottom and bring it up to make the �u�
9. Grasp it even with the first part of the �u� and bring it to the back, pinch a little at the top
10. Grasp the wire at the bottom and bring it up
11. Grasp the wire at the top even with the top of the �R� bring it down to the front of the wire and to the right you have a small(�L�) (picture #4)
12. Grasp it from the bottom and bring it up
13. Grasp the wire even with the �u� and bring it to the back and left and down (piture #5)
14. Grasp it at the base of the �b� and pull the wire to the right, the wire will look like a strait line (picture #6)
15. Grasp it at the bottom next to the �b� and bring it up
16. Grasp it even with the �u� and bring it to the back and down
17. Grasp the wire and bring it up
18. Grasp it even with the �u� and bring to the back, pinch it a little at the top
19. Grasp it at the bottom of the �u� and with your hands grasp the wire bring it to the left and to the right and up to make the tail of the �y�
20. Grasp it at the bottom an bring it up.
21. Congratulations you finished the name. Now, take the end; grasp it a little higher than the tip of the �B� (look at the picture for reference) and bend it up, fold it back and around the pliers twice, to form a double loop; then around the wire twice to finish it; cut the excess in the back. This is for the chain; do the same with the piece of wire that you left in the very beginning. Finish filing the ends and carefully crimp the ends. Polish it a little and Enjoy it!!!
22. TO DO THE HEART, take about 2 � � of wire and bend it in half, pinch it and roll it, open the two ends. Grasp it about � inch and bend it down, (make one loop) grasp the other side and do the same. Grasp it at the top of the second loop and bend it back; pinch it . Cut the extra wire in the first loop, make it look like a heart. Fold the wire to make a loop to hang do it twice. Put it on the name
.
Any questions e-mail at [email protected]
If you have a problem I will try to help. Email me at:
Maggie
Please use these lessons for your personal use only. Do not include them in any lesson plans, in whole or part, that you are teaching or publish them on any web page or use them in any commercial way without permission from me.
These pages are all copyright 2001 by Maggie Santiago.
If you find something wrong with these pages please contact [email protected]