TUTORIAL


Part 6 "Evelyn" Pendant


By: Maggie Santiago

1. Start about 1� inches from the end of the wire, making a loop
2. Leave pliers there and with hands make a sort of a 'c'( see pic #1)

3. Grasp wire under the first In the inside of the �c� loop and make another loop (smaller one) (see picture #2)
4. Leave the pliers there;working on the back of the wire; with your hands bend it to the left and to the right to make another loop (see picture # 3)
5. Grasp the wire at the bottom of the�E� and make a complete loop make sure that the wire goes to the back of the �E� finish at the top of the loop
6. Grasp the wire at the top of the loop and bend it down (see picture # 4)
7. Grasp the wire at the bottom even with the bottom of the �E� and bend it to the back and up pinch at the bottom, makink sure you are hiddind the wire in the back will look like only one wire.
8. Grasp the wire with your hands and carefully pull it to the right to make the �v� (see picture # 5)
9. Grasp the wire at the top a litlle taller than the other sied of the �v� and bend it down hidding the wire in the back and pinch it
10. Grasp the wire at the top and roll it to the right a little, leave the pliers there and pull a little to the right with your hands
11. Grasp the wire close to thewhre you rolled and make a loop you are making the �e� hold the pliers in there and pull with your hand to make thr loop of the �e� (see picture #6)
12. Grasp it at the top even with the top of the �E� and bend it to the left and to the right making sure your wire is in the back (you are making the �L�)
13. Grasp it even with the bottom of the �L� and bring it up
14. Grasp the wire even with the �e�and bend it to the right and down
15. Grasp at the bottom ; bring it up
16. Grasp it even with the top of the �e� and bend it to the back and down pinch a little and roll a little
17. From the back grasp the tail (wire should be in front of the pliers) bring to the left and up to the right. (you should have the �y� ) (see picture # 7)
18. Grasp ithe wire and bend it up
19. Grasp the wire even with the top of the �y� and bend it to the right and down
20. Grasp the wire at the bottom and bend it to the back and up hidding the wire in the back pinch a little
21. Grasp the wire a t the top even with the �y� and ben it down to make a hump of the �n�
22. Grasp the wire at the bottom even with the others and bend it up
23. Congratulations you finish the name. Now, take the end; grasp it a little higher than the tip of the �D� (look at the picture for reference) and bend it up, fold it back and around the pliers twice, to form a double loop; then around the wire twice to finish it; cut the excess in the back. This is for the chain; do the same with the piece of wire that you left in the very beginning. Finish filing the ends and carefully crimp the ends. Polish it a little and Enjoy it!!!



LINKS TO THE LESSONS
Lesson one
Lesson two
Lesson three
Lesson four
Lesson five
Back to Index

If you have a problem I will try to help. Email me at: Maggie

Please use these lessons for your personal use only. Do not include them in any lesson plans, in whole or part, that you are teaching or publish them on any web page or use them in any commercial way without permission from me.


These pages are all copyright 2001 by Maggie Santiago.

If you find something wrong with these pages please contact Micki
Hosted by www.Geocities.ws

1