These are some of the projects I have enjoyed designing.
I will continue to add more, so please come back again.
The graphics might take a minute to load.
Please be patient.
This is my Valentine's Day card for the Valentine's Day '97 Swap.
Size = 5" X 7"
Front - 2 panels, opens from center
Inside - open
THE FRONT:
There are 2 panels made using giftwrap paper.
The paper is glued to the cardstock.
The center 'diamond' piece is layered with gold foil which
does not display very well in the scan.
Glued on top of the gold foil is a small piece of high gloss cardstock,
with the heart graphic.
The edge of the cardstock is sparkle, red emboss tape.
The layered 'diamond' is glued only to the left half of the card.
THE INSIDE:
Made in PA 3.0, on a 'Sign' layout,
and printed on the reverse side of the high gloss cardstock.
The inside of the card displays graphics and text.
The dark red item you see on the left is the back side of the
'diamond' which has red celophane wrapping paper glued to the back.
This is my card for the Pet Swap '97 Swap.
Printed on white cardstock.
Top fold card, Size = 5" X 7"
Front Windows and doors open to display photos of my pets.
Back
THE FRONT:
The windows lift up from the bottom, and the doors open from the middle,
to display photos of my 3 pets.
I used an Exacto knife to carefully cut:
down the center, and across the top and bottom of the doors
as well as along the sides and the bottoms of the windows.
The photos were printed on a seperate piece of paper, the same size as the front
of the card, and glued on the inside.
( The photos of my pets can be viewed on
My Special Pets Page.)