SanyChem Coating's
Series of single coat, thick- film products provide many advantages
over thin-film coatings:
Thin-film
coatings require several coats to achieve a specified thickness
of even 20 mils DFT. SanyChem
thick-film coatings and linings are applied in a single coat at
a thickness ranging from 20 to 150 mils DFT, thereby decreasing
labor cost and increasing the speed with which the area is returned
to service.
- No
Inter-Coat Adhesion Problems
Multiple
coats increase the risk of intercoat adhesion problems thereby making
application more difficult. This can be avoided with SanyChem's
single coat application.
SanyChem
coatings and linings have little or no VOC's, making
these coatings less hazardous to apply and helping the owner meet
environmental regulations.
SanyChem
coatings and linings cure within hours rather than days
(see individual data sheet
for cure schedule and conditions). This fast cure advantage substantially
reduces the costs associated with a tank, pipe or containment area
being out of service.
-
Impact and Abrasion Resistance
SanyChem
coatings and linings offer superior impact and abrasion
resistance compared with thin-film coatings. This is important to
the longevity of the coated area.
SanyChem
coatings and linings offer excellent chemical resistance
for continuous immersion in harsh environments, including 98% sulfuric
acid, sweet and sour crude oil, and molten sulphur. See SanyChem's
Chemical
Resistance Guide for more information on your chemical
resistance requirements.
SanyChem
coatings and linings will reduce the overall cost of a
job, from labor costs to the costs associated with the tank, vessel
or pipe being out of service. SanyChem coatings
and linings will also save the owner money over the long-term with
its higher quality coated surface.
Home Page|
Markets | Products | Contact | Questions
|
Opportunities |
Environment| Request | Disclaimer
| Applications|
Custom Shop
Copyright © 2003 SanyChem,
Inc. All rights reserved.
600
N Pine Island Road # 450 Plantation, FL 33324-1311
Phone +1- 954- 315- 0252 / +1 - 800-432-0607 / Fax: +1-954-315-0280
[email protected] | [email protected]
|