Power Distribution Control

Objective:

1)Prevent damage to the electrical system.

2) Use easily attainable and easily replaceable parts.

3) Minimize cost by utilizing "junk" from around the house.

• Hot glue
• Face plate screw
• 120 VAC Neon indicator light w/ mounting assembly

Parts List:

• 14 AWG wire
• 15 amp grounded extension cord plug
• Project box with PC board mount
• 1 amp fuse
• 22 AWG wire
• Soldier
• Grounded household outlet
• 4 1/8" pop rivets with washers
• 10 amp DPDT Relay w/120 VAC solenoid - NOTE! -used both poles in parallel to break the circuit
• 10 amp relay socket

Tools Used:

• 1/8" plastic/wood/metal twist drill
• 7/16" plastic/wood/metal twist drill
• #2 Phillips screw driver
• Heavy tin snips
• Pop rivet gun
• Rat tail file
• 1" Bi-Metal hole saw

• Sharp knife or razor
• Wire stripper
• Soldiering iron
• Soldier
• Felt tip pen or scribe
• Hot glue gun
• Steel rule
• Center Punch with hammer