Base coating is the most critical part of this whole process.
Clean air, clean spray gun, clean environment and proper lighting is extremely crucial in how your end result will come out.
You do not need an expensive spray booth to achieve a good job, but you do need to pay attention to detail.
Our suggestion to you is to start on smaller practice pieces before taking on larger projects so that you can get the feel of the process. There is a learning curve to this process just like with anything else. Inexperienced sprayers may run into even more frustrations, but the end results of your efforts will prove fruitful and rewarding!
First, mix base coat as directed and apply a nice even, thin, wet coat. make sure there are no dry looking areas on each coat applied. Apply two to three coats until smooth glass-like appearance is achieved, allowing 10 - 20 minutes between each coat. |
