Well after I broke down the major parts of the first model. I made some new parts and put new and old parts together and created this gun. The barrel and the valve is the only parts that came off the first model.I made the stock, battery pack, and the rear chamber. The butt plate that you see in the pictures came from a 9 ounce co2 tank. I was going to add a co2 system but I found out how much the regulator, hose, fittings, and everything else cost, around $100 something dollars, and I already put about $50 into the gun itself. Well I just added the fill valve to the chamber and left it like it was. Maybe in the future I will add the co2 system to this gun, but for now, it is one of biggest events at the end of the day of paintballing.
The chamber is 6 inchs in length and 2"in diameter. at a 100 psi It can lodge a paintball through a 1/4" piece of particle board.
Update! I have finished this gun. It is finally a different color besides white. It is now brown. go here to veiw the finished gun. |
