Series DPZH
programmable Digital Force Gauge with Outputs
Programmable high / low setpoints with color-coded LED indicators and output signal for quick
go/no go testing
960 Data memory for
computer download
External switch
display hold and clear
lbf, kgf, and N units
are selectable
RS-232C, Digimatic
and Analog outputs
Runs on internal
NiCad batteries or AC adapter
Ergonomic, heavy duty metal construction
Capacity up to 1100
lbs (push/pull)
Overload capacity
200% of F.S.
Real time and peak
mode (selectable)
Tare function
Overload alarm and
output signal
Low battery indicator
Reversible display
Force Control
with MX Series test stands
Full set of
accessories, AC adapter/ charger and carrying case. DPZH gauges are sold
in kit form.
Model DPZH
is high performance, digital force gauge which offers programmable high/low
setpoints for go/no-go testing. ORANGE lights up for measurements less than
Low setpoint, GREEN for between High and Low setpoint, and RED for over High
setpoint.
Store up to 960
values in memory, which can be transmitted using the Digimatic or serial
output ports. Use the real time mode to display load transients, or the peak
mode to capture the peak force achieved during a test. Selectable measuring
units of lbf, kgf, or Newtons.
Connect an Imada
DPZH force gauge with an MX Series test stand and enable force controlled
testing. Force control can automatically stop testing when the force value
reaches the high setpoint programmed on the DPZH force gauge, or maintain
the force between the DPZH High and Low setpoints. Force control is ideal
for fatigue or non-destructive testing.
All DPZH gauges
are sold in kits which include the force gauge, hard carrying case, AC
adapter/charger, tension hook, four compression adapters, extension shaft
and knurled steel handles. Built-in NiCad rechargeable batteries. |
DPZH Specifications
| Accuracy |
� 0.2% � 1 LSD |
| Selectable Units |
Pounds, Kilograms or Newtons |
| Overload Capacity |
200% of F.S.
(Overload indicator flashes
beyond 108% of F.S.) |
| Power |
Rechargeable NiCad battery
pack or AC adapter |
| Battery Indicator |
Display flashes BAT when
battery is low |
| Memory |
Non-volatile, recall up to
960 loads |
| Setpoints |
Programmable high/low
setpoints with color-coded indicators and output signal |
| Outputs |
RS-232, Digimatic
and � 2 VDC analog output |
| Operating Temp. |
32� to 100�F (0� to
40�C) |
|
