 |
 |
| Thebookmann | Richard Bolai All Rights Reserved 2005 |
|
|
 |
| The measurement for the spine material should be 1/4 the length of book and glued cutting any excess from the tail. Rubbed down with the folding stick to remove any air and allowed to dry. |
 |
 |
 |
 |
 |
| With the spine material attached, the covering material is glued to the boards and placed at the spine material�s edge at the head any excess to the tail is trimmed and set to dry. Remember to glue from the centre out and cover all surfaces. |
The book is complete and should be pressed under weights overnight till the glue is dry thoroughly. |
| Key words: fold pressed attached reinforcement to spine mark up and stab and sew attach boards attach spine material attach coving materal cut to size. press |
| Home | Public Art | Artist | ArtBooks | Book Works | Blog | What's New |
|
| Using a square the book is complete by trimming all three sides less then 1/8 of an inch starting at the tail, then the head and foredge the front side of the book. A utility knife can be used. |
| Trimming and marking using a T square to draw a marking were the will be trimmed. |
| View all pages |