Home Up Contents Search Links

Mopar A-Body
Up Discussion Automotive Show-Offs

 

 

[Product Image]  
Products geared mainly towards slant six powered cars.

Prices are in Canadian dollars.  Packaging and shipping costs are extra. 

Visit the Bank of Canada for the current exchange rate to check the prices in your currency:  http://www.bankofcanada.ca/en/exchange.htm

Pricing

Photo Description SKU # Price
90º Adapter Plate to mount Holley/AFB carb on Offenhauser 4bbl Intake manifold.  Machined from 1/2" 6061-T6 aluminum.  Throttle shafts are parallel to engine for symmetrical fuel distribution.  Throttle linkage is not included.  Fasteners are included. KIT0001 $80.00
Starter solenoid mounting plate kit.  Machined from 3/8" 6061-T6 aluminum.  Bolts onto bottom of Slant Six intake manifold and allows the use of stock starter with twin Dutra Duals exhaust manifolds.  Fasteners are included. KIT0002 $30.00
Silicone Heater Hose Upgrade Kit.  Always easily removable and lasts forever.  Kit consists of:
3' of 1/2" hose
4' of 5/8" hose
2 each of 1/2" SS ET gear clamps
4 each of 5/8" SS ET gear clamps 

Never replace a heater hose again!

Need a different size or length? Let us know!

 KIT0003 $45.00
Intake manifold heater kit for manifold with OEM-style exhaust manifold.  Machined from 1/2" 6061-T6 aluminum.  Helps fuel distribution and minimizes off-idle bog by restoring a hot spot in the intake manifold  floor.  Includes starter solenoid mounting holes when using headers or twin Dutra Duals exhaust manifolds. Bolts onto bottom of Slant Six intake manifold and has a machined-in pocket to match the bottom of the intake manifold.  Splice it into the return line from the heater core.  Kit consists of:
3 each of 5/16" nuts, bolts, & washers
2 each of 3/4" brass street elbows
2 each of 5/8" brass hose barb to 3/4" NPT adapters
10' of silicone hose
2 each of 5/8" ET-10 SS Gear Clamps

(The most expensive part of this kit is the hose.  We recommend it because of the heater's close proximity to the exhaust pipes.)

 KIT0004 $150.00
Kit w/o hose & clamps $85.00
Bare Plate $52.00
Rochester QuadraJet mounting kit for 4bbl intake manifold.  You supply the fuel line, carb, air cleaner, and throttle linkage.  Reuse your old fuel line or make one from 5/16" brake line.  Kit includes:
Edelbrock PN2696 Spreadbore to Squarebore adapter
Edelbrock PN1932 Hot Air to Electric Choke Conversion
Mr Gasket PN 3704 Vacuum Cap Assortment
3/8" to 5/16" Fuel Line Bushing
1/4" brass NPT Pipe Plug

If you are looking for a carb for your Offy intake, remember that a new Holley 390 CFM 4bbl is more expensive.  Check the performance products page for current pricing.

 KIT0005 $120.00
Kit w/o electric choke $82.00

 

 

 

Send mail to fraso AT mergetel.com with questions or comments about this web site.
Last modified: October 08, 2004
Hosted by www.Geocities.ws

1