
.jpg)
A television studio production control room in Olympia, Washington, August
2008.
The first regular television broadcasts started in 1937. Broadcasts can be
classified as "recorded" or "live". The former allows
correcting errors, and removing superfluous or undesired material, rearranging
it, applying slow-motion and repetitions, and other techniques to enhance
the program. However, some live events like sports television can include
some of the aspects including slow-motion clips of important goals/hits, etc.,
in between the live television telecast.
American radio-network broadcasters habitually forbade prerecorded broadcasts
in the 1930s and 1940s requiring radio programs played for the Eastern and
Central time zones to be repeated three hours later for the Pacific time zone
(See: Effects of time on North American broadcasting). This restriction was
dropped for special occasions, as in the case of the German dirigible airship
Hindenburg disaster at Lakehurst, New Jersey, in 1937. During World War II,
prerecorded broadcasts from war correspondents were allowed on U.S. radio.
In addition, American radio programs were recorded for playback by Armed Forces
Radio radio stations around the world.
A disadvantage of recording first is that the public may know the outcome
of an event from another source, which may be a "spoiler". In addition,
prerecording prevents live radio announcers from deviating from an officially
approved script, as occurred with propaganda broadcasts from Germany in the
1940s and with Radio Moscow in the 1980s.
Many events are advertised as being live, although they are often "recorded
live" (sometimes called "live-to-tape"). This is particularly
true of performances of musical artists on radio when they visit for an in-studio
concert performance. Similar situations have occurred in television production
("The Cosby Show is recorded in front of a live television studio audience")
and news broadcasting.
A broadcast may be distributed through several physical means. If coming directly
from the radio studio at a single station or television station, it is simply
sent through the studio/transmitter link to the transmitter and hence from
the television antenna located on the radio masts and towers out to the world.
Programming may also come through a communications satellite, played either
live or recorded for later transmission. Networks of stations may simulcast
the same programming at the same time, originally via microwave link, now
usually by satellite.
Distribution to stations or networks may also be through physical media, such
as magnetic tape, compact disc (CD), DVD, and sometimes other formats. Usually
these are included in another broadcast, such as when electronic news gathering
(ENG) returns a story to the station for inclusion on a news programme.
The final leg of broadcast distribution is how the signal gets to the listener
or viewer. It may come over the air as with a radio station or television
station to an antenna and radio receiver, or may come through cable television
[1] or cable radio (or "wireless cable") via the station or directly
from a network. The Internet may also bring either internet radio or streaming
media television to the recipient, especially with multicasting allowing the
signal and bandwidth to be shared.
The term "broadcast network" is often used to distinguish networks
that broadcast an over-the-air television signals that can be received using
a tuner (television) inside a television set with a television antenna from
so-called networks that are broadcast only via cable television (cablecast)
or satellite television that uses a dish antenna. The term "broadcast
television" can refer to the television programs of such networks.
Social impact
This section does not cite any references or sources. (April 2010)
Radio station WTUL studio, Tulane University, New Orleans
The sequencing of content in a broadcast is called a schedule. As with all
technological endeavours, a number of technical terms and slang have developed.
A list of these terms can be found at List of broadcasting terms. Television
and radio programs are distributed through radio broadcasting or cable, often
both simultaneously. By coding signals and having a cable converter box with
decoding equipment in homes, the latter also enables subscription-based channels,
pay-tv and pay-per-view services.
In his essay, John Durham Peters wrote that communication is a tool used for
dissemination. Durham stated, "Dissemination is a lens- sometimes a usefully
distorting one- that helps us tackle basic issues such as interaction, presence,
and space and time…on the agenda of any future communication theory
in general" (Durham, 211). Dissemination focuses on the message being
relayed from one main source to one large audience without the exchange of
dialogue in between. There's chance for the message to be tweaked or corrupted
once the main source releases it. There is really no way to predetermine how
the larger population or audience will absorb the message. They can choose
to listen, analyze, or simply ignore it. Dissemination in communication is
widely used in the world of broadcasting.
Broadcasting focuses on getting one message out and it is up to the general
public to do what they wish with it. Durham also states that broadcasting
is used to address an open ended destination (Durham, 212). There are many
forms of broadcast, but they all aim to distribute a signal that will reach
the target audience. Broadcasting can arrange audiences into entire assemblies
(Durham, 213).
In terms of media broadcasting, a radio show can gather a large number of
followers who tune in every day to specifically listen to that specific disc
jockey. The disc jockey follows the script for his or her radio show and just
talks into the microphone. He or she does not expect immediate feedback from
any listeners. The message is broadcast across airwaves throughout the community,
but there the listeners cannot always respond immediately, especially since
many radio shows are recorded prior to the actual air time.