MODIFICATIONS

 

 

 

Home
Interior
Exterior
ColdAir
Writeups
Links

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

back to top

Some of the Mods I have added to the car, H&R Springs, Cattman SS Y-pipe, PIAA Head/Fog lights, Hyper White turn signals and the list goes on.

HR Spring Shot

Shown here is a 2000 Nissan Maxima SE, In sherwood Green color with 17x8 Borbet Type-E wheels, Also this car is lowered 1.4front and 1.3rear using H&R Springs. Also I have a Courtesy Front Strut Tower Brace Installed for Added handleing Stability. With the springs, the center of gravity was lowered and the spring rates were higher then stock to help reduce body roll and turn in response.

Here are some pictures of the car after it was lowered. (click for larger image)





PIAA Lighting

PIAA SIDE SHOT

Here are some pictures of my car with PIAA Plasma Headlights and PIAA Platinum Fog Lights and Hyper White Turn Signals. Plasma Headlights give it a purplish color b/c of the Xenon Gas that the bulbs are filled with. Platinum on the other hand are pure white bulbs like florecent tube lights. Hyper bulbs are painted with blue coat to give them a white look.

Here are some pictures of the car at night with PIAA Bulbs. (click for larger image)




STILLEN HIFLOW INTAKE

Stillen Intake

This here is a Stillen HiFlow Air Intake. It adds about 3hp to the car (some say it adds more noise then anything). Helps the car breath a little better but is not soo good for the hot weather b/c it sucks in hot air around the engine bay. Place Racing makes a cold air intake which goes in the lower chamber of the front fender and that sucks cold air from underneath the car.

Here are some pictures of the car with STILLEN INTAKE (click for larger image)

Hosted by www.Geocities.ws

1