|
Home
Product
Services
Tool Tips
About Us
Contact Us
Saftey Instructions
|
|
 |
Complete Saw Blade Reconditioning Service
New Tech Saw Servises is a full service saw blade repair & sharpening center. We will send your dull, damaged, warped or wobbly saw blades back to you like new. And sometimes better than new.
Don't throw that damaged blade away. Send it to us and we'll show you what we can do!
|
Testing & Inspection
The first step a blade goes through when you send it for sharpening is a complete inspection and testing to determine what work is required.
The carbide tipped blade being tested for run out and tension. The graph drawn by our expert is used to hammer, flatten and tension the blade if necessary.
|
Hammering & Tensioning
During the testing process, a blade may need to be hammered flat and in some cases, roll tensioned to return stiffness to the blade so it will cut straight. These procedures are accomplished by our in-house personnel.
|
Sharpening
Almost every shop has the ability to touch up a slightly dulled blade. New Tech Saw Servises's equipment is specifically designed to manufacture as well as sharpen your blades to accurate specifications. This means that every tooth will be exactly the same as the previous one which is the way to keep your blades balanced and cutting properly.
Give us your test blade for a 100% guaranteed trial order resharpening. If you are not satified, for any reason, the work will be done free of cost.
|
Complete Sharpening Price List
|
Number of Teeth
---
6 - 40
---
41 - 60
---
61 - 80
---
81 - 100
---
101 - 120
---
121 - 130
---
131 - 150
--- HSS Saw
|
Cost
Rs.100
Rs.150
Rs.200
Rs.250
Rs.300
Rs.325
Rs.375
Rs.300 |
Tip Replacement
--- Standard Tip sizes
--- Alluminium tips |
Rs.25 per tip
Rs.30 per tip
|
Hammering (Smithing)
--- Normal flattening
--- Excessive flattening |
No charge
Rs.100
|
Router Bits
--- Straight flute bits
--- Angled flute bits
--- Cut off (Shorten) |
Rs.50 each
Rs.75 each
Rs. 100 each |
Shaper Cutters (Die & profile Cutter)
--- 3 wing less than 1" wide
--- Cutters over 1" wide |
Rs.75 each
Rs.100 each |
Door Panel Bits
--- Three wing
--- Four wing |
Rs.50 each
Rs.75 each |
Boring Bits
--- Carbide tipped
--- Steel |
Rs.50 each
Rs.25 each |
Planer Knives
--- Carbide planer
---HSS planer |
Rs.10 inch per knife
Rs.50 each blade |
Pick-up & Delivery
--- Standard
--- Rush Charge
--- Blades over 18" |
3 days No Charge
add 5%
add 10% |
|
Have questions about re-sharpening of tools?
Our experienced staff is ready to assist you with any inquiries
you may have. Feel free to call us at
New Tech Saw Services
K-103 Amar kalony, Main Rohtak Road,
Nangloi, New Delhi 110041, India
Mobile: 09811430147, 09818221758,09350665447
Phone: +91-11-65420988,+91-11-65420989
E-mail:[email protected], [email protected]
Top of Page |
|
Home |
Product |
Services |
Safety |
About Us |
Contact Us
Copyright � New Tech Saw Services, 2007. All rights reserved.
|
