Various pictures of current work:

Here is the intake modified to take a throttle body from a LT1.  You can also see the fuel pressure gauge that I added after adding a Holley Fuel Pressure Regulator.  After the turbo install I will use this, along with some 24# injectors to tune the extra fuel needed for all of that positive induction.

Another view of the intake.

Here's a picture of the gauges I added in preparation for the turbo.  The top one is an oil temp gauge and the lower one is a vacuum/boost gauge(although all I see at the moment is vacuum).

Here's a picture of the spare 3.4 engine I got for less than $300!  I'm going to build it up with forged pistons and a different cam to suit the turbo better.

Here's a picture of the 3.4 block after I stripped it down.

Here's a bottom view of the block.

a mass of 3.4 guts...