Instructions for Raven

The Legs

1. Start with a 1x4 plate. Add a 2x4 plate as shown.
2. Add a regular 1x4 brick and a 1x4 girder. Insert a black peg to the last girder hole.
3. Add a 1x6 slanted girder and a 1x6 plate to the top.
4. Next, add a 2x6 plate to the top of that.
5. Insert an extended peg through the first girder hole.
6. On the left side add a 1x4 slanted girder.
7. On the right side, add a 1x10 girder.
8. Turn leg over. Add a 2x3 plate, a 1x6 plate, and another 1x3 plate as shown.
9. Turn the leg over again. Add a 1x8 plate and a 1x6 plate as shown.
10. Add a 1x6 brick...
11. and a 1x8 brick as shown.
12. Add a 1x10 plate.
13. Add a 1x4 plate and a 3x2 slanted brick to hold it all in place.
14. Turn leg over again. Add a 1x2 plate and a 1x2 hinge brick to the underside of the leg as shown.
15. Add a 1x2 plate with rod and two 1x1 lights.
16. Lastly, add a radar piece to the rod. Repeat steps in mirror fashion to complete the left leg.

Hosted by www.Geocities.ws