1. Start with
a
4x10 plate.
Add a 2x4 brick
and a 1x4 brick
to the bottom.
|
|
2. Add two
2x3 inverted
slant bricks.
|
|
3. Add two
landing gear
wheels and
turn the
component over.
|
|
4. Add three
1x2 smooth
plates and two
1x1 lights
as shown.
|
|
5. Add wing
plates. The
upper corners
should connect
to the 1x1 lights
underneath.
|
|
6. On top of
each wing, add
a 1x1 light
and a 1x2
smooth plate
as shown.
|
|
7. Along the
middle, add
two 2x4 bricks
and a 2x3 brick.
Than add two
1x8 girders
as shown
in the second
picture.
|
|
8. Underneath,
add double
landing wheels
and two
1x2 plates.
|
|
9. Flip the
componant
again and
add the
shown
piece.
|
|
10. At the
back, add
two 2x4
bricks.
|
|
11. Than add
two more
2x4 bricks
and a
slanting
"nosecone".
|
|
12. In the
"nosecone"
add a 2x3
slanting brick.
Add a 1x2 brick
and a gun mount
under the
nosecone's tip.
|
|
13. Add a
2x6 plate with a
1x2 plate at
the end.
|
|
