previous page in this
Manual
7. Installation and the Replacement of Batteries
Unscrew lid 36 with the help of a coin in the lids slot.
Place the cells inside the opening 37 with its ¨positive¨ side
to the lid (on the internal side of the cover the mark "+" is engraved).
*Note - Standard the TTL prisms should come with one big cell but many
now come with a battery addaptor which allows immediate fittment with 3
button batteries. If no addaptor is provided stack your 3 button cells
and wrap the outside with non conductive tape and then fit as 1 into
the prism.
next page in this Manual
