Knives

' Kaught Knapping '

Knives which we've knapped using Flake over Grinding methods.

Flake Over Grinding Blade with Whitetail Burr Handle OAL 7 3/4"

Knife blade is Smoke Obsidian with dark banded lines through the length of the blade. Deer horn handle has beautiful natural markings with a full set of burrs around the base. Blade is approximately 4" long; the Handle is approximately 3 3/4" long. In addition, the knife blade is offset about 25 degrees to the centerline of the handle. The included base of natural driftwood makes a wonderful display setting for this knife.

$49.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#275-KN004

Flake Over Grinding Blade with Marble Handle OAL 9 1/8"

Blade is made of Black Crystal w/Gold Sheen speckle Obsidian. Handle is of Black & White Aguila Marble. Blade is approximately 4 3/4" long with the handle being 4 3/8" long. Hold this blade up to the light and you'll see the crystals highlite against the Opaque blade.

$135.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN005

Purchase Knife with Priority Shipping

Flake Over Grinding Blade with Marble Handle OAL 12"

This large knife is made of Black Mahogany Obsidian. There are several clear spots in the blade where you can look right thru the blade. The handle made of Yellow and White Italian Carrara Marble has several unique patterns which include dark bands, a crystalline white rotation near the hilt and an accentuating white and brown pattern near the butt end of the handle. The blade measures 6 5/8" long and is approximately 1 5/8" wide. The marble handle is approximately 5 3/8 inches long.

$180.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN006

Purchase Knife with Priority Shipping

Flake Over Grinding Blade with Marble Handle OAL 8 3/4"

This beauty is made of Gray Rainbow Obsidian. The edges are opaque, while the center of the blade shows dark gray bands when held up to the light. The blade has a medium gray appearance and is approximately 5 1/4" long. The uniquely shaped handle is made of White and Gray banded Aguila Marble. The gray bands accentuate the medium gray. The handle is approximately 3 1/2 " long and is about 1 7/8 " at its widest point.

$130.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN007

Purchase Knife with Priority Shipping

Flake Over Grinding Blade with Marble Handle OAL 5 1/2"

This little beauty is made of Dark Chocolate Obsidian and has a piercing point. The blade is approximately 3" long. The Aquila Marble handle has an intermixed pattern of white, tan, brown, yellow, clear and black. The handle is about 2 1/2" long.

$85.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN008

Purchase Knife with Priority Shipping	Purchase Knife with Display Case and Priority Shipping

Flake Over Grinding Blade with Marble Handle OAL 7 3/4"

The blade is made of Mahogany Obsidian and is approximately 3 3/4" long. The Aquila Marble handle is blended with a mixture of white, gray and black. The handle is about 3 1/2" long.

$105.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN009

Purchase Knife with Priority Shipping	Purchase Knife with Display Case and Priority Shipping

Flake Over Grinding Blade with Marble Handle OAL 6 1/2"

Black Banding with a touch of Mahogany accent the clear blade which is approximately 3 1/2 " long. The Aquila Marble handle has an intermixed pattern of white, gray, and black, with a ground stone texture. The handle is about 3" long.

$100.00 SOLD Part#273-KN0010

Flake Over Grinding Blade with Marble Handle OAL 6"

The 3 1/4" blade is of Smoke Obsidian. The Black, Grey and mostly White Aquila Marble handle is about 2 3/4" long.

$100.00 SOLD Part#273-KN0011

Flake Over Grinding Blade with Marble Handle OAL 6 1/2"

The dagger type blade is made of Black Crystal Obsidian which reveals superb colors and shades when held into natural light. The blade is approximately 3 1/2" long. The Aquila Marble handle is almost 99% pure white except for a couple of dark mineral spots along with shiny speckles which are highlighted in natural lighting. The handle is about 3" long.

$100.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN0012

Purchase Knife with Priority Shipping	Purchase Knife with Display Case and Priority Shipping

Flake Over Grinding Blade with Marble Handle OAL 5"

This skinning knife is made of Mahogany Obsidian and has a piercing point, with a 5/8" long cutting edge on the reverse end of the point. The blade is approximately 2" long. The Italian Carrera Marble handle has an intermixed pattern of white, tan, brown, yellow, light orange and black. The handle is about 3" long.

$85.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN0013

Purchase Knife with Priority Shipping	Purchase Knife with Display Case and Priority Shipping

Flake Over Grinding Blade with Marble Handle OAL 7 1/4"

This dagger type blade is made of Smoke and Mahogany Obsidian.The front half of the blade is mahogany with some black stripes and blends beautifully into the Smoke portion of the blade, which is 3 3/4" long. The Aquila Marble handle has an intermixed pattern of white, tan, brown, yellow, red and black. The handle is about 3 1/2" long.

$110.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN0014

Purchase Knife with Priority Shipping	Purchase Knife with Display Case and Priority Shipping

Flake Over Grinding Blade with Marble Handle OAL 8"

This utility type blade is made of rare Burns Green Obsidian and is approximately 4" long. The black, white, and gray Aquila Marble handle is uniquely hollow ground for a great feel in your hand. The handle is about 4" long.

$120.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN0015

Purchase Knife with Priority Shipping	Purchase Knife with Display Case and Priority Shipping

Flake Over Grinding Blade with Marble Handle OAL 7 1/4"

This skinning type blade is made of Rainbow Obsidian which has blue, green and purple hues when viewed in natural light. The blade is approximately 3 3/4" long. The Picasso Marble handle has an intermixed pattern of white, tan, brown, yellow, black. The handle is about 3 1/2" long.

$110.00 SOLD Part#273-KN0016

Flake Over Grinding Blade with Marble Handle OAL 8"

The blade is of banded smoke Obsidian and has a piercing point, with a cutting edge about 5/8" long on the reverse edge of the point. The blade is approximately 4 1/2" long. The Wendon Marble handle blends from tan to dark brown, and is highlited with red, black, and dark brown mineral veins. The handle is about 3 1/2" long.

$120.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN0017

Purchase Knife with Priority Shipping	Purchase Knife with Display Case and Priority Shipping

Flake Over Grinding Blade with Marble Handle OAL 8 1/4"

This knife will proudly display on your mantel. The 4 1/2" long blade is of Black Crystal Sheen Obsidian. Hold it up to the light and admire the beautiful display of sheen and opaque edges. The Italian Carrera Marble handle has an intermixed pattern of white, tan, brown, yellow, light orange and black. The handle is about 3 3/4" long.

$120.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN0018

Purchase Knife with Priority Shipping	Purchase Knife with Display Case and Priority Shipping

Flake Over Grinding Blade with Marble Handle OAL 9"

The blade on this knife is of Dark Chocolate Obsidian. The blade is approximately 5" long. The Aquila Marble handle has an intermixed pattern of white, tan, brown, red, gray and black. The handle is about 4" long.

$135.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN0019

Purchase Knife with Priority Shipping

Flake Over Grinding Blade with Marble Handle OAL 7"

A Dark Chocolate Obsidian blade beautifully accents the dark gray banded Picasso Marble handle. The blade is approximately 3 1/2" long. The handle has an overall length of about 3 1/2".

$105.00 SOLD Part#273-KN0020

Flake Over Grinding Blade without a Handle OAL 6"

This replica of the US Flag deserves a Salute. Expertly flaked and sharpened, the blade is approximately 6" long, and about 1 1/2" wide. This item can be attached to your handle or displayed proudly as is.

$90.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN0021

Purchase Knife with Priority Shipping	Purchase Knife with Display Case and Priority Shipping

Flake Over Grinding Blade with Marble Handle OAL 8"

The blade on this knife is of Tri-Flow Obsidian. Patterns of Mahogany, clear, and black accent this skinning shaped blade. The blade is approximately 4" long. The Aquila Marble handle has an intermixed pattern of white, tan, brown, red, gray and black. A mineral mixture of brown, cream, rust, and dark brown accent the center part of the handle. The mineral mixture is visible on only 1 side. The handle is about 4" long.

$120.00 SOLD Part#273-KN0022

Flake Over Grinding Blade with Marble Handle OAL 5 1/4"

The blade on this knife is of Dual-Flow Obsidian. Patterns of Mahogany, and black accent this skinning shaped blade. The blade is approximately 2 1/4" long. The Candy Onxy handle has an intermixed pattern of white, cream, and light yellow. The handle is about 3" long.

$75.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN0023

Purchase Knife with Priority Shipping	Purchase Knife with Display Case and Priority Shipping

Flake Over Grinding Blade with Marble Handle OAL 5 1/2"

The blade on this knife is of Burns Green Obsidian. This type of Obsidian is becoming harder and harder to find. The blade is approximately 2 1/2" long. The Marble handle has an intermixed pattern of white, cream, and several shades of green, ranging from light to dark. The handle is about 3" long.

$85.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#273-KN0024

Purchase Knife with Priority Shipping	Purchase Knife with Display Case and Priority Shipping

Knives which we've knapped using standard pressure flaking methods.
Click on photo for a larger image.

Knife blade is Mahogany Obsidian with a bit of golden sheen. Deer horn handle has beautiful natural markings. The Golden 'sinew adds a stunning contrast to the knife. Blade is approximately 2 3/4" long; the Handle is approximately 3 1/4" long. The included base matches the knife with a deer horn fork support.

$39.00 plus $9.00 for Priority Mail Shipping to US addresses.
Part#275-KN001

Purchase Knife with Priority Shipping

Knives made with traditional pressure flaking methods.

Obsidian Blade with Mule Deer Horn Handle OAL 7 1/2"

Obsidian Knife made from Black and grey Obsidian, it has a handle with a eagle carving at the end. The length of the knife is 7 1/2 inches long, the stand is made from wood and deer antler, the handle is made from a mule deer antler. With display.

$40.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#274-KN00EAGKN

Purchase Knife with Priority Shipping

Black Dacite Blade with Chola Cactus Handle OAL 10 1/4"

This knife features a 5.25" Black Dacite Knife Blade tied with artificial sinew onto a 5" Chola Cactus Handle. As an added
feature there is a gold inlay on top of the Cactus handle about an inch below the Knife Blade. With display.

$50.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#274-KN00DACITEKN

Purchase Knife with Priority Shipping

Obsidian Blade with White Tail Horn Handle OAL 9 1/4"

The length of the knife is 9 1/4 inches long. The blade is made from Triple Flow Mahogany Obsidian. The handle is made from a piece of White Tail Horn, that when sanded turned Ivory Yellow color. The blade is set into the handle with resin and then finished off with man made sinew. The stand is made from wood and antler, and matches the knife perfectly. With display.

$50.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#274-KN00MAHKN

Purchase Knife with Priority Shipping

Kay County Flint Blade with White Tail Horn Handle OAL 8"

This is a Beautiful 2.75" Kay County, Oklahoma Knife blade with an overall length of 8". the Knife Blade is tied to a Deer Antler Handle using artificial sinew. With display.

$40.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#274-KN00DANTLKN

Purchase Knife with Priority Shipping

White Carrara Glass Double Blade Knife OAL 7"

A unique looking and shaped double ended Knife with an overall length of 7". The long blade is 2.5" and the shorter blade is 1.75" long. The Knife is Handle is wrapped using artificial sinew.

$40.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#274-KN0025

Purchase Knife with Priority Shipping

White Carrara Glass Double Blade Knife OAL 8"

A unique looking and shaped double ended Knife with an overall length of 8". Both blades are about 3 1/4 " long and about 1 1/2" wide. The center handle is wrapped with artificial sinew.

$40.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#274-KN0026

Purchase Knife with Priority Shipping

White Carrara Glass oval knife with Deer Horn Handle OAL 5.5"

This is a replica of an ancient Mayan knife used for ceremonial purposes. The shape of the blade enhanced the easy slitting of the victims throats. Glass blade is expertly knapped and is about 4.5 " from tip to tip. The deer horn handle is attached using a modern resin and finished with artificial sinew. Wood display stand is included.

$40.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#274-KN0027

Purchase Knife with Priority Shipping

Mahogany Obsidian Blade with Marble Handle OAL 5.25"

This is a replica of an ancient Mayan knife used for ceremonial purposes. The shape of the blade enhanced the easy slitting of the victims throats. Obsidian blade is expertly knapped and is about 4 " from tip to tip. The Italian Carrara Marble handle is shaped and polished to perfection. Wood display stand is included.

$60.00 plus $9.00 for Priority Mail Shipping to US addresses
Part#274-KN0028

Purchase Knife with Priority Shipping

Acrylic 'Mirrored' Display Case
Acrylic display case is approximately 8 inches X 3 3/4 inches x 3 7/8 inches in size. The bottom is mirrored for an added dimension for that special item which you wish to display. This case will fit most of our knives. An 8 1/4 inch knife will fit into this display when centered diagonally. A larger disply case will be available in the near future for our 'larger' knives. Included with the case is an acrylic cradle with a couple pieces of double stick tape for securing the cradle onto the bottom of the display case. This prevents the displayed item from moving when handling. Knife in this display is not included. When purchasing a Display Case with one of our knives, there is no additional shipping cost for the display.

$16.00 plus $9.00 for Priority Mail Shipping to US addresses

Part#300-31084

Purchase Display Case with Priority Shipping

Go to Home Page
Top of Page
View Arrow Points
View Large Points

OAL = Over All Length

Created using Netscape Composer Updated 2.04.09

Hosted by www.Geocities.ws