|
|
Ovens |
Cure
Ovens
An oven uses a heat source, most commonly electrical heaters or a gas
burner and a fan to heat the interior of an insulated enclosure.
Different powder materials require different cure temperatures, commonly
in a range between 177 - 204 °C. The part is heated by the hot air in
the oven and it in turn conducts heat into the coating. The coating
must be held at temperature for a predetermined length of time to
reach full cure. So the cure cycle is so many minutes at so many
degrees of temperature. The time it takes to bring the metal up to
temperature must be added to the cure time requirement to deter-mine
the full cycle time in the oven.
This page will provide you the information on some of the oven manufacturers and suppliers.
|
Anand Impex
Manufacturer , Exporter of Turn-key Powder Coating, Liquid Painting
Plants & Accessories.
Anand Impex
518 Sadashiv Peth
Near Dyanprabodini
Pune 411030
Tel 91 204485970 Res.:91204490404
E-mail [email protected]
website: www.anandimpex.com
Our Product Range includes,
Powder Coating Booths, Ductless booths with high recovery efficiency
multicyclones (98% guarenteed recovery )
Liquid Paint Booths (All types of Paint Booths for variety of
application.)
Ovens, ( Electrical, Diesel Fired, Gas Fired, Infra-red Ovens for
Powder/Paint Curing. Tray dryers for chemical/ Pharmaceutical.)
Conveyors (Overhead conveyor with biplaner chains.)
Pretreatment Systems (Turn-key P.T. systems. Transporters, Monorail
hoists, Twin hoist, Spray P.T. On line filteration for sludge removal.)
Accessories (Pressurisation of Paint Shops, Air replacement units for
paint shops, custom built material handling,Testing Equipments, Oven
Calibrations for ISO certification.)
Other Upgrading existing plants.Diesel/ Gas firing retrofitting,
Conveyorisation.)
A.K. Enterprises
(Sole Authorised Dealers of “MITSUBA” Products for Eastern Zone
Manufacturers of Booth, Oven, Complete Batch/Conveyorised Plants on
Turnkey Basis)
147A/1 Girish Ghosh Road, Room # 104, Ghusuri
Howrah - 711107, Kolkata
Tel: 033-26559543/0073 Mobile: 98310-60860/033-31029106
Fax: 033-26550073
Email:
[email protected]
|
Dayline Spray Systems
Pvt. Ltd.
307 Chetak Centre
RNT Marg Indore
INDIA
Phone (0731) 2517497
|
Prism surface coatings
Pvt. Ltd.
208/9, 5th Main Road, OMBR Layout, Banaswadi
Bangalore - 560 043
Phone-00 91-80-5450213 / 214 / 388
Fax Nos: 0091-80-5452461
Web site: www.prismsurface.com
Email: [email protected]
Contact Person: Mr. M.K. Ganesan, Managing Director
|
Infrared Technologies
(Products: Electric and gas catalytic infrared heater, oven, and furnace
systems.Powder Coat Products: Electric and gas catalytic infrared curing
and booster ovens )
2010 HWY 58
Oak Ridge, TN 37830
Contact Person: Charles T. Blue (President)
Tel: 865.574.9784
Cell: 865.405.4095
Fax: 865.574.9793
Email: [email protected]
Website: www.infraredheating.com
|
Raj Systems Pvt. Ltd.
C-102, Nyati Millennium, Viman Nagar
Nagar Road, Pune - 411014. Maharastra ( India )
Tel. No. : +91-020-6630061 , 6630086
Fax. No. :+91-020-6631246
E-mail :[email protected]:
website www.rajsystem.com
|
Sames India
Hiranandani Gardens, 601,
Omega, Powai, Mumbai, 400 076 India
Tel: 91 22 570 45 87 fax: 91 22 570 45 88
Website http://www.sames.com
Email: [email protected] or
[email protected]
|
|
|
|