|
|
Testing Labs |
Testing is performed on the finished
film to confirm that it has all of the performance properties that the
material is supposed to provide. Testing confirms that the
pretreatment process is working correctly, providing the necessary
properties to the substrate prior to coating application. Testing also
confirms that the powder has been properly applied and cured. Initial
testing of a coating process is used to establish a standard. Periodic
testing is done to confirm that the process is able to maintain
the standard. Panels for coating tests are run through the washer and
then coated the same as production parts. The panels are usually aged
for 24 hours at room temperature prior to testing.
|
Th
Coaters Test
Laboratory
Shop No 1 & 2,
Shree Sadan, 90 ft Road
Sane Guruju Mulund (E)
Mumbai 400 081
Tel 568 4659
Fax 568 2810 |
|
|
|