Recipe # 35
Ched's Driver 1776
1. | Owner | Ched |
2. | Email Address | [email protected] |
3. | Vehicle Type | '74 Karmann Ghia |
4. | Displacement | 1776 |
5. | Crankcase | New stock Full Flowed |
6. | Crankshaft | Demello 69 Counterweighted |
7. | Connecting Rods | Stock rebuilt balanced rods |
8. | Pistons&Cylinders | Cima/Mahle 90.5 |
9. | Piston Rings | standard |
10 | Camshaft | Engle 110 |
11 | Cam gears | Stock |
12 | Cam followers | New |
13 | Pushrods | Chrome Moly |
14 | Cylinder Heads | Stock, Port, polish semi hemi combustion chamber, Single HD valve springs |
15 | Rockers | Stock Rockers, Solid Shafts |
16 | Spark Plugs | |
17 | Exhaust | 1 3/8" Single Quietpack |
18 | Compression Ratio | 7.4:1 |
19 | Fuel System | Single Webber 32/36 progressive |
20 | Fuel Pump | Stock |
21 | Oil Pump | Stock 26 mm |
22 | Oil Sump | None |
23 | Oil Cooler | Stock cooling tin, , Fram HP1 filter |
24 | Ignition | Stock |
25 | Distributor | Bosch 009 |
26 | Flywheel | 12.5 lb |
27 | Pulley | Steel GB type |
28 | Clutch | |
29 | Pressure Plate | Kennedy 1700 lb |
30 | Transmission | Stock '74 |
31 | Wheels | EMPI 8 spoke |
32 | Tires | Firestone 195/60 R 15 Rear, Firestone 195/50R15 Front |
33 | Max. Horsepower | Not tested |
34 | Max. Torque | Not tested |
35 | 0-60mph Time | Untested |
36 | 1/4 mile Time | Untested |
37 | Engine Mileage | 4000 |
38 | Cost To Build | ~$2300 (I found some deals on parts) |
39 | Purpose | Daily Driver |
40 | Comments | Engine is fully balanced and smooth as silk. A little disappointed in performance compared to expectations. I plan to add Kads and an ignition upgrade. |