There is actually a lot more to do here than the picture implies. After you have installed the new Calmini arm, you must attach the spindle to the upper ball joint, and install a new cotter pin. Then you can install the dust covers on the two front shocks, and remove the old shocks and replace them. Install the new Calmini steel braided brake lines using the stock mounting hardware, and bleed your new brakes. (Picture) Install the bump stop extension plates for the front end, and finally, install your new torsion bars.
Whew! Thats a lot of work!
One last thought, don't adjust the ride height on the front of your truck just yet. We will match that to the rear-ride height once the rear is complete. For now, you can install the front wheels back on, and move to the rear of the vehicle.
