Now remove the ball-joint from the upper A-arm. (four bolts) Once this is done, you can remove the two large bolts from the mounting tower that actually hold the upper A-arm in. (Picture above)
Note that you now hold the upper A-arm, the brake line, and the pivot pin assembly. You will need to remove all of these. A bracket on your stock A-arm holds the brake line to it - this must be installed on your new Calmini arm. Also, the pivot pin assembly will need to be removed and installed onto your Calmini arm as well. We used white lithium grease on the blue Calmini polyurethane bushings, and would recommend that you do as well.
You can also install the upper ball-joint onto the Calmini arm. Once you have completed the transfer of all these peices, you can reassemble the front suspension.
