J O J A P S (mjurnal)
JOURNAL ONLINE JARINGAN PENGAJIAN SENI BINA
VOLUME 12 -
2018
Click the title to download the full paper.
Paper
01/2018 - Impact of Gypsum Coating on Palim Oil Trunk Fiber Board
Surfaces
Kinanti Wijaya, Hasyifa Syamil, & Ruri
Aditya Sari
Main Author from
Universitas Negeri Medan.
Abstract -
The objective of this study was to determine the impact of gypsum coating on the
physical properties of fiber board obtained form palm oil trunk. The polyester
is used as a filler board. This study was conducted based on testing in
accordance with SNI 01-4449-2006 variation using a wax material, polyester and
Palm Oil Trunk Fiber (OPTF) with formulation such as 30:40:30 (A), 20:40:40 (B),
and 10:40:50 (C). From the results showed that physical test density ranged from
0.84 g / cm3 to 0.94 g / cm3 the value of the water content was about 9.61% -
13.3%, water absorption was about 8.22% - 8.75% and swelling thickness was about
0.94% - 1.31%. The water content of sample with the formulation10:40:50 is
higher (13.3%) compared to requirement in SNI 01-4449-2006. The effect of gypsum
coating on the physical properties of fiber boards such as affecting the density
and gypsum values undergoes some changes such as color changes in gypsum, and
cracks in gypsum.
Paper
02/2018 - SWOT Analysis as Strategy to Improve Competitiveness of Durian Pancake
Medium Enterprises
Suci, Dimas Ari Sanjaya, Iswandi Idris, Ruri Aditya Sari, Supriyanto &
Masniati Murni Ritonga
Main Author from Politeknik LP3I Medan. Indonesia.
Abstract -
One of the efforts that should be conducted by a businessman to compete in the
global world is that understanding the situation and mastering market strategy.
This study aimed to determine and analyze competitive strategies and improve
competitive qualities contained based on SWOT analysis of strengths, weaknesses,
opportunities and threats. This study conducted qualitative descriptive
research. The data was obtained from observation, interview, and library study.
The data were analysed based on IFAS matrix, EFAS matrix, SWOT diagram and SWOT
Matrix. The results of this study indicate that durian pancake medium enterprise
of SALINARY used product strategy and good service strategy to the customer.
Business strategy was good enough but still need to do evaluation in more
strategy to develop Durian pancake business. Based on SWOT Analysis, to improve
the Quality of durian Pancake Business it was necessary to apply aggressive
strategy or SO strategy. Therefore, Durian Pancake Enterprises could empower the
opportunities to exist.
Paper 03/2018 - Compressive Strength of Concrete Masonry Units with
Plastic Bottle Sludge
Sarinah binti Ali,Jusmine Hanis Binti Abdullah & Siti Harni Binti Zainal
Main Author from
Politeknik Melaka. Malaysia.
Abstract -
Current design of concrete masonry emphasize compressive strength and
application of green element. As the waste from water plastic bottle increased,
therefore innovation of plastic bottle can reduced the cost of recycling and
practice eco-friendly. This paper utilised the plastic bottle that filled with
sludge as cores in concrete masonry with three arrangement of plastic bottles
used which are (6x6), (5x5) and (4x4). However when dealing with material as
additional material to the concrete it will be interact against with different
behaviour respect to achieve the high strength properties. The purpose of this
paper is to evaluate compressive loading capacity through compressive strength
test. The compressive strength of concrete with different arrangement of plastic
bottles were observed. The test showed the maximum compressive strength achieved
at 24.2 N/mm2 and minimum strength at 8.7 N/mm2. In addition, the results meets
the specification for concrete masonry unit strength. However the trend of
strength decreased as the total number of bottles increased. It can be observed
the less of bottle used as replacing the area of concrete, increased the
compressive strength. Hence, the water absorption also observed. Determination
of the compressive strength of the concrete masonry units with plastic bottle
with sludge can be used further study to be implementing in Malaysia.
Paper
04/2018 -
SWOT Analysis as Strategy to Improve Competitiveness of Durian Pancake Medium
Enterprises
Nina Arina, &
Suhardi
Main Author from
Politeknik LP3I Medan. Indonesia.
Abstract -
Virtual reality (VR) is a technology created
to able to
interact with a computer-simulated environment. VR was invented by Morton Heilig
in 1950 and began to be developed in 1968 by general electic. VR can make it
easier to access the locations they want. VR technology will be implemented in
the form of websites that display information visually using virtual reality
video that aims to introduce the Museum of Grace as one of the tourist locations
in the city of Medan. The technique used to produce this VR video is stitching
panorama, which is the process of merging video - video into a single unit that
produces videos that can be viewed from all directions. The development
methodology used in this research is multimedia software design methodology that
emphasizes on 6 stages of multimedia development called MDLC (Multimedia
Development Life Cycle). The tools used in designing this application are
Autopano Video Pro and Panorama 360. The end result of this app can display a
collection of animals totaling over 2000 animals in the Museum of Grace in the
form of 360o videos that can be viewed from various directions
Paper
05/2018 - Analysis of Coral Reefs in Sawinggrai
Village, Meosmansar District, Raja Empat Regency, West Papua Province
Ana Febrianti Sunarto, Ratna Suharti, Effi A. Thaib & Basuki Rachmad
Main Author from
Jakarta Fisheries University.
Abstract - Coral reefs are unique ecosystem in tropical areas where the habitat
of reef fish became a source of food and economic income for villagers. Effort
to use these resources and overexploitation by human activities have been
reduced its production capacity. Among many cases of destruction of the sea
cause by some people, so recently various concrete actions to save them have
been hold by local communities as villagers in Raja Ampat. The purpose of this
study is to know how about the condition and relationship between coral reefs,
reef fish and coral reef limited factors of life in Sawinggrai Village,
Meosmansar District, Raja Ampat, West Papua. In general, the percentage of coral
reefs dencity have a range of 24,23 to 82,33% into medium category with an
average of 46,95%. Coral reefs ecosystem management efforts in Sawinggrai
Village are make by the local wisdom as Sasi and marine protected areas. It is
suggested that the government associated with the NGO makes socialization about
the importance of the conservation of coral reefs and make it more intese and
keep it regulary.
Paper 06/2018 - Analysis of
Converter Gas with Performance Test Validation Liquefied Petroleum Gas (LPG)
Drive Motor Boats / Fishing Vessels
Pungkas Prayitno, M. Dwi Trisno & Dahmir Dahlan
Main Author from
Pancasila
University, Jakarta
Abstract - During most of Small Fishermen use fishing boats with a gasoline
engine. Fuel shortages and the high price of oil makes its own problems for
small fishing. The use of alternative energy that is cheap, convenient, safe to
drive a small fishing boat engines are indispensable.This study is to design a
converter gas with methods VDI 2221 (Verein Deutscher Ingeieure = Association of
German Engineers), and experimentation. To get the engine performance, torque
and power effective, it is necessary in order to be considered for the fishermen
to use LPG as an alternative fuel. The first results of this study using LPG
fuel directly, two systems created using pneumatic flow control valves, and the
use is purely 3kg LPG gas. The third material gas converter using aluminum in
order to make corrosion resistant, because this gas converter application to the
tangent of motor fishing boat with sea water. From lab scale test results show
that the converter gas is made to function properly. Thus obtained, 7.71 Nm
torque, and motor power 1.46 Kw at 1800 rpm motor rotation with the LPG
consumption of 7.26 grams / minute.
Paper 07/2018 - THE INFLUENCE OF LEADERSHIP
STYLE ON CORPORATE CULTURE TOWARD EMPLOYEES’ SATISFACTION AT LP3I BUSINESS
COLLEGE BANDA ACEH
Yafiz
, Mirnawati
, Lisnawati, Thasrif Murhadi &
Rahmaniar
Main Author from
Politeknik Kutaraja
Abstract -
A study on the satisfaction and its impact toward the
employees’ performance of LP3I Banda Aceh had been done at Lembaga Pendidikan
dan Pengembangan Profesi Indonesia (LP3I) Business College Banda Aceh with the
samples of 150 employees by using path analysis method. The aim of this study is
to see the relationship between leadership style and corporate culture
variables, the influence of leadership style and corporate culture variables
toward job satisfaction, and the influence of leadership style, corporate
culture and job satisfaction variables toward the employees’ performance of LP3I
Business College Banda Aceh.Based on the analysis, the value of t
hitung
for the relationship between leadership style and corporate culture at 10,099
and t tabel
1,981 with a significance level of = 5%, so t
hitung
> t tabel
or Ha is accepted, Ho is rejected and it means there is a significant influence
between leadership style and corporate culture so that the first hypothesis of
this study is accepted. From the analysis, it is also obtained value of t
hitung
for the influence of leadership style and job satisfaction at 4,311 and t
tabel
1,981,
with a significance level of = 5%. So, thitung
> ttabel,
or Ho is rejected, while Ha is accepted. It means that there is a significant
influence of leadership style toward job satisfaction and there is also a
significance influence of corporate culture toward job satisfaction.
Furthermore, from the analysis as well, it is obtained value of t
hitung
for leadership style at 2,292 and t
tabel
1,981, with a significance level of = 5%, so thitung
> ttabel,
corporate culture obtained t
hitung
5,214 t tabel
1,981, with a level significance of = 5%, so thitung
ttabel,
job satisfaction obtained t
hitung
6,637 t tabel
1,981, with a significance level of = 5%, so thitung
> ttabel..
Ho is rejected; while Ha is accepted, meaning that leadership style, corporate
culture, and job satisfaction have a significant influence toward performance so
that the third hypothesis of this study is accepted. Therefore, leadership
style, corporate culture, and job satisfaction significantly influence
performance. Branch Manager, as a leader of LP3I Business College Banda Aceh, is
expected to play an active role in implementing an appropriate leadership style
so that the employees’ satisfaction can be improved and corporate goals can be
achieved effectively and efficiently, especially the working relationship
between leader and its employees
Paper 08/2018 -
The Influence of Motivation, Discipline, Work Environment, Education and
Workshop Towards Bipedal Civil Servants’ Performance in Aceh Province
Josi
Farmiati, Zahriatul Aini, Rahmat Arfan, Hamdani &
Dahlia
Main Author from
Politeknik Kutaraja
Abstract -
Human resource (HR), in
governmental organization which is familiar with civil servants, are expected to
be able to explode their energy, thoughts, talents, and creativity to achieve
organizational goals. Employee work results are the results of quality and
quantity of work achieved by an employee in carrying out the duty in accordance
with the responsibilities given. To assess the quality of human resources, it
can be measured by employee performance. Various problems found in the field
showed that the factors such work motivation, discipline, work environment,
education and training (DIKLAT) of BAPEDAL Aceh Province employees need to be
further improved so that overall employee performance becomes better, therefore
further function and the duty of BAPEDAL can be carried out based on the
objectives expected by the agency. This research was conducted for the Influence
of Motivation, Discipline, Work Environment, Education and workshop towards
the Performance of Civil Servants of the Environmental Impact Management
Agency (Bapedal) of Aceh Province. The results of the study proved that
simultaneously work motivation, work discipline, work environment and training
significantly influence Beta Y (civil servants’ performance)