Rubik's Magic II
Solving the Linked Side
 |
| Signature Tile
|
Before performing this solution, you must first form the puzzle in the 6x2 rectangular shape. I am not going to supply that kind of info; I just don't have that kind of cyber-space. You must also recognize which side is the Linked Side, but that part's easy. There are 3 tiles that have have 3 arcs drawn upon it, and they belong on the Unlinked Side. Therefore, the Linked Side is the side without any Triple-Arc Tiles.
1: Get the Signature Tile off the Middle Section
Even though the diagrams show the tile starting and landing on particular spots, use the moves below if the Signature Tile appears in any of the 8 squares in the middle scetion. But first, make sure that you are working on the side with corded corners, which may not necessarily be the Linked Side. After finishing the moves, you may have to flip the puzzle over to view your progress on the Linked Side. Of course, if the Signature Tile is already on a corner to begin with, then skip these instructions.
Note: You may have to repeat this series twice before the Signature Tile lands on a corner. Always make sure you start off by working on the side with corded corners before doing the series, and before repeating the series.
2: Move the Signature Tile to the Correct Corner
The correct spot for the Signature Tile is the lower-right corner. If it appears on the left side instead, merely rotate the entire puzzle 180 degrees, and the Signature Tile will then be on the right side. If it appears on the upper-right corner, use the moves below to shift it to it's correct spot. Once again, make sure you are working on the side with corded corners (which may not necessarily be the Unlinked Side).
3: Swap the Other Tiles in Place
How can you tell if you need to swap the other tiles, anyway? Well, there are two other tiles (besides the Signature Tile) that have text on them; one with the company logo and the other with copywrite info. If those two tiles (shaded gray in the diagrams below) are on the top row, they need to be lowered down, next to the Signature Tile on the bottom row. If all three of these tiles are already on the bottom row, then skip this step.
 |
|
 |
|
 |
Tiles with text at
the wrong location |
|
|
|
Tiles with text at
the correct location |
In this case, you must work on the Linked Side, regardless of the cord patterns. Because of that, there are two sequences below; but you can only use one of them, not both. If the Linked Side side has corded corners, then do the first sequence only; if it does not, then do the second sequence instead.
Corners WITH cords:
Corners WITHOUT cords:
4: Rotate all Tiles in Place and Solve the Puzzle
By now, all tiles on the Unlinked Side should now be in place. However, the Signature Tile must be rotated until it looks like the diagram above. Once the Signature Tile is rotated correctly in place, the remaining 11 tiles are also fixed as well. You may have to repeat this series of moves three times before the Linked Side is solved. Always make sure you start off by working on the side with corded corners before doing the series, and before repeating the series.
What does this sequence do? It rotates 6 tiles clockwise, and the other 6 counter-clockwise. If you have to repeat this sequence, you may have to flip the puzzle over (between repeats) to check on your progress.
