Welcome
to the Magicland Electronics' Welcome
to the Magicland Electronics' 
|
Jumper Cables are used to "Jump Start" an automobile or other device that uses an electric starting motor. Although jump starting is simple, it can be dangerous--especially if you make a "simple" mistake. All you need do to safely "Jump Start" a vehicle is to use jumper cables to connect the positive (+) terminal of the bad battery to the positive terminal of the good battery and likewise for the negative (-) terminals. However, if it is night, or the markings on the battery are hard to read one usually needs to make an intelligent guess on which terminals are positive and which are negative. If you goof, you may destroy the computer systems on one or both vehicles. Although unlikely, an explosion may even result. The Jumper Cable Wizard was designed to make Jump Starting a dead or weak 12 volt battery safer and easier. It also has a built-in feature which tells you, with colored LEDs, the condition of a 12 volt battery. It is designed to be connected and attached directly to a set of jumper cables. If you use the Jumper Cable Wizard according to the instructions you will never make a goof in jump starting a battery EVEN IN TOTAL DARKNESS! |
||
The following kit/parts are available from Magicland Electronics
| Kit/Part Description |
Price Each |
 Complete
kit of parts for the Jumper Cable Wizard, including Printed Circuit
Board and documentation, BUT NOT INCLUDING THE JUMPER CABLE ITSELF(The photo at the left is of the completed Jumper Cable Wizard with all parts soldered to the board. You will get all these parts but you must solder them to the board yourself. This job is easy with the help of our detailed instructions.) |
$13.50 |
 Bare (no parts) Printed Circuit Board for the Jumper Cable Wizard (includes documentation.) (Note: This printed circuit board is included with the complete kit above and is meant for those who may already have most or all of the electronic parts included in the kit.) |
$5.00 |
| Terms and Conditions: | ||
We accept checks, money orders and PayPal . PayPal makes it possible to order directly over the Internet using a major credit card, including Visa, Mastercard, American Express and Discover. For more details on PayPal click the PayPal logo. If you want to order using PayPal simply email your order to: [email protected] and we will send you a PayPal invoice. That's all there is to it! For detailed information on ordering using PayPal see our Step By Step Ordering Using PayPal page. If you don't want to use PayPal you can mail your order along with a check or money order to: Magicland Electronics, 4380 S. Gordon, Fremont, MI 49412. To get a copy of our order blank that can be printed out with the help of your browser click Order Blank. For a sample mail order see our Sample Mail Order page. Shipping Information: We normally ship USPS Priority Mail with delivery confirmation. We can ship UPS but we found this is slower. We have a flat rate charge of $4.75 for shipping and handling. However, if you purchase more than $25 worth of parts and/or kits in one order SHIPPING IS FREE! All funds are in U.S. Dollars. If you are ordering from Canada or other countries please Email us at [email protected] before ordering. Michigan residents, please to add 6% sales tax. |