Jim's Garden Railroad
MY HOWE TRUSS BRIDGE CONSTRUCTION    
Page Created on 3/6/2005
This Howe Truss Bridge was built from Garden-Texture plans.  The plans were for a 104 foot bridge (52 inches).  I needed a 144 foot bridge (72 inches) so I built this one 6 feet long and it works just GREAT.  The  plans are easy to use.  I used my (inexpensive - garage sale for under $50) table saw. I purchased an expensive blade - almost more than the table saw - because I cut my own redwood parts.  I have a nice supply of very seasoned redwood fencing boards that are almost 1 inch thick.  Redwood is great to work with especially with that new blade! It cut those old redwood boards like it was warm butter.
Double Header GP30's over the Howe Truss Bridge
Click Signal to return to Jim's Garden RR Home
 w / AristoCraft Stainless track
6 foot long Howe Truss Bridge
Built to Scale 1/2 " = 1'-0 (1:24)
Vistors since 3/6/05
Tension Rods are common metal clothes hangers -cut & threaded for 2-56 nuts.
I cut my own redwood bridge pieces
Gluing Bottom Beams to brace seats
Screws held Cross Beams after they were glued
Cross Beams will support the stringers
Final Cross Beams are glued
Installation test on supporting blocks
Return loop runs past Howe Truss Bridge
A very strong 6 foot span -Great design by Garden-Texture
Creekbed under bridge will be done later
Bella (granddaugher age 5 ) operates on this  Railroad too!  The elephant and tiger on the waterfall are hers. 
Click to View Photos of Compression Bridge
Click to view Trestle Photos
Double click on all photos for a larger view.
Hosted by www.Geocities.ws

1