H O M E P A G E
The Story Photo's Video's Friend's Cars

Welcome!

The Mitsubishi Cordia Turbo arrived in Australia in the early 1980's... Performance was it's name and power was it's game! Straight out of the factory and pulling 15.8 seconds in a quarter mile, when the norm for 4 cylinders of the time was 17 to 18 seconds, and projecting 6.9kg of weight per engine horsepower! The Cordia's performance competitors were the Nissan EXA/ET turbos, the little Daihatsu Charade turbo and also Mitsubishi's own more expensive rear wheel drive Starion.

The Mitsubishi Cordia is front-wheel-drive, a very similar design to the Colt, it has a wider track for increased stability. Fitted with sports MacPherson front struts and a beam rear axle. The turbo model receiving higher rated springs and dampers both front and rear, and fatter sway bars.

Half a second slower than a 300ZX Turbo on a 1/4 Mile, the Cordia Turbo gives most V8's a good run for their money! With many simple modifications, an increase in power is easily achieved by the Cordia Turbo GSR.

CORDIA GSR 1985 AB
Engine: 4G62BT Sirius 1.8 litre SOHC 8 valve 4 Cyl
Turbo: Mitsubishi TC06
Power: 110kw @ 6000 rpm
Torque: 210Nm @ 4000 rpm
Weight: 1030 kg
Petrol: Leaded 97+ Octane
   
0-100km/h: 7.9 sec
1/4 mile: 15.9 sec

Project News :

07.05.2006- Cordia is in the crash repair shop getting the chassis repaired!

22.04.2006- I had the vehicle inspection, and the Cordia would have passed, but the inspector spotted a crack in the chassis next to one of the engine mounts. He told me to get the crack welded up with a plate! So... to do this I had to remove the engine and take it to a professional welder. He quoted me around $300. Then I have to put the engine back in and book for another inspection!

16.03.2006- Next week is INSPECTION!!! Just waiting for their call for a booking time...


Counter
Visits since
09/05/2006
Copyright © 2006 - All Rights Reserved
Hosted by www.Geocities.ws

1