|
Cycle Unit CO2 Test Smoke Test Stack Temperature Test Vent Draft Test Clean and Inspect Combustion Chamber Clean and Inspect Electrodes Clean and Inspect Nozzle Assembly-replace nozzle Clean and Inspect Heat Exchanger Clean Inspect and Adjust Burner Assembly Inspect Fuel Pump Test Transformer Inspect and Adjust Wire Connections Inspect Burner Fan Inspect Burner Motor Inspect Fan Motor(warm air heating system only) Check Fill and Vent Pipes Check Vent Whistle (tank alarm) Inspect Circulator Motor (hydronic heating system only) Inspect and Test Safety and Operating Controls Clean Flue Pipe and Chimney Base – if accessible and necessary Inspect and Replace Customer-supplied Air Filter (warm air heating system only) Inspect and Replace Oil Filter Visually Inspect Indoor/Exposed Oil Lines Visually Inspect Fan Belts and Drives (warm air heating system only) Water Dip Tank for Condensation Inspect Flue Pipe to Chimney Check Draft Regulator-adjust if necessary |
|
ANNUAL MAINTENANCE CHECKLIST |
|
Contact Info : |
|
Phone: (603) 674-9885 |
