Ok, we have saved our mask, now, let`s use it
Close out the black & white clip art and
Open up the colored image we want to use our mask on
You can use one of mine, or one of your own
*Note* Depending on the Height & Width of your Mask & Your Image
You might have to rotate your image for the Mask to fit properly
If you need to rotate your image
Go to/Image/Rotate/Right checked/ 90% checked/ click OK
Now
Go to/Masks/Load from Disk
Select the Mask you saved
Click/Open
You should now have a transparant Image
*Note* If you don`t like what you turned up with...Try inverting it/If you want to invert your mask
Go to/Masks/Invert
Now, you can go ahead and save as is,Or
You can turn your masked image into a tube!!