 |
|
 |
 |
 |
 |
 |
| Ok this is the stock frame with the homemade crossmember and kickup in place. |
| Here is the kick up and tacked in place. I used metal tubing to keep the frame from moving. Also you can see that I cut off the stock rear crossmember. |
| I moved the Front Crossmember ahead 2 inches to increase the wheelbase and give more room for the engine. |
| A string is used to make sure everything stays straight Here you can see the new center crossmember. |
 |
| The frame has been Xed for square and is ready to be boxed. |
 |
 |