home - pics - equipment - tin foils - tanks
Here is a nifty little do it yourself solution to your bundle of cords. The Power Strip has two keyoles in the back of it. So, I took an old piece of trim, put two screws in for the key holes to grab a hold of, and then screwed the wood in with two Sheet Metal screws. Then, I labeled each individual cord with some marker on tape right under the outlet.
Here is a (not so simple) solution to pump storage. I took a small piece of wood, spray painted it black, stuck a nice steel L-Beem in the far right corner, and screwed that into the stand's corner. Next, I took two eyehole screws and screwed them in so that the pump would fit without vibrating, (it came with that rubber bottom.) Note that the pump doesn't fully fit on the wood; this was not intentional, and I don't think it makes a bit of difference.
If you have any questions about this equipment, feel free to ask me: [email protected]
