The vehicle's reliability, survivability and lethality has surpassed initial expectations. Of the 2,200 Bradleys involved in Operation Desert Storm, only three were disabled. In fact, more enemy armored vehicles were destroyed by Bradleys than by the Abrams Main Battle Tanks! The M2 Infantry Fighting Vehicle [IFV] is a fully tracked, lightly armored vehicle that offers significant improvements over the M113 series of armored personnel carriers. The M2 posses greater power, greater acceleration, and an advanced suspension for a significant increase in cross-country speed. Like the M113, the primary purpose of the M2 is to carry infantryman on the battlefield, and transport and support them with fire if necessary. The M2 Bradley carries a crew of three (Commander, Gunner & Driver) and a six-man Infantry section into combat. The M3 Cavalry Fighting Vehicle [CFV] is exactly the same chassis as the M2 IFV with some minor internal differences. The M3 is a cavalry/scout vehicle, instead of carrying 6 dismounts in the payload compartment, the M3 carries a pair of scouts, additional radios, ammunition, and TOW and Dragon or Javelin missile rounds. In fact, the only noticeable differences between the M2 and the M3 are that the external firing ports for the squad M16s are absent on the M3. By the end of 1994 the Army had produced a total of 6,724 Bradleys, 4,641 in the M2 Infantry configuration and 2,083 in the M3 Cavalry configuration. Three versions of the M2/M3 have been procured: 2,300 "basic," or A0 Bradleys; 1,371 A1 Bradleys which incorporates the TOW 2 missile subsystem; and 3,053 A2 "high survivability" vehicles. Currently, the Army is conducting depot conversion of A0 and A1 Bradleys to the A2 configuration, modifying 1,423 A2s to the A2 ODS configuration, and preparing to upgrade 1,602 A2s to the A3 configuration. M2/3A0s and A1s will continue to be upgraded to the A2 configuration in FY96. Selected M2/3A2s will be modified with the ODS upgrade pachage through FY02. The First Unit Equipped (FUE) for the A2 ODS variant was FY96. The M2/3A3 vehicle configuration is in EMD with FUE scheduled for FY00. The M2A3 and M3A3 Bradley Fighting Vehicle Systems (BFVS) are improved versions of the M2A2 and M3A2 BFVS. The BFVS-A3 includes enhancements intended to improve lethality, mobility, survivability, and sustainability. Additionally, these enhancements are intended to provide increased situational awareness and digital command and control capabilities necessary to provide information superiority to the dominant maneuver force. The Bradley Fighting vehicle and the Abrams Tank are the two central components of the dominant maneuver digital force. The M2A3/M3A3 model of the Bradley will facilitate enhanced command and control, greater lethality, and provide mobile protected transport of an Infantry squad, and Cavalry crewmen to critical points on the battlefield. M2A3/M3A3 will facilitate mechanized Infantry, cavalry scout, and other claimant (Bradley equipped Fire Support and Stinger Teams) missions in the 21st Century. Upgrades include advanced technology in the areas of command and control, lethality, survivability, mobility, and sustainability required to defeat current and future threat forces while remaining operationally compatible with the Abrams main battle tank. The M2A3/M3A3 will provide overwatching fires to support the dismounted infantry and suppress/defeat enemy tanks, reconnaissance vehicles, IFVs, armored personnel carriers, bunkers, and attack helicopters. In the Cavalry role, it will be used to conduct reconnaissance operations, economy of force, and screening missions. It will be employed in Combined Arms units alongside the M1A1 D and M1A2 SEP tank. The A3 upgrade to the Army�s Bradley fighting vehicle system is a major component of the Army digitization initiative, designed both to complement the capabilities provided by the M1A2 SEP and to incorporate needed enhancements identified during the Gulf War. The M2A3/M3A3 will be equipped with a digital electronic architecture incorporating on-board subsystem monitoring, diagnostics/ prognostics, and an Army Technical Architecture (ATA) compliant Command and Control software suite that is fully interoperable with M1A2 SEP and M1A1 D tanks, and other Force XXI digitized platforms. When equipped with upgraded Bradleys, mechanized infantry units will be able to share battlefield data with M1A2 SEP-equipped armor units. The digitization upgrades will improve both situational awareness and sustainability through automated fault reporting and diagnostics. The A3 upgrade will also increase the lethality of the Bradley by adding an improved fire control system and a commander�s independent thermal viewer. BFVS-A3 enhancements include a vehicle control and operation system to control and automate many crew functions and to enhance situational awareness by transmitting, receiving, storing, and displaying digital messages. This digital capability is to be compatible with all components of the combined arms team. the improved Bradley acquisition system (IBAS) and commander's independent viewer, both 2nd generation FLIR's, to improve target acquisition and target engagement. a position navigation system with GPS receiver to enhance situational awareness.