08/07/02 My shipment arrived from South Africa today! I now have all the parts necessary to complete the engine. Parts include; ported head, schrick 288 cam, matched inlet manifold, tubular exhaust manifold, heavy duty oil pump, baffled sump, windage tray, 210mm flywheel and an adjustable cam wheel. The flywheel is currently at the machine shop being balanced and lightened.


22/07/02 After a small delay the car was finally painted today. I will pick it up before the weekend so that provided the weather allows I will be able to put it back together by the following Monday morning. The motor has been assembled and should be ready for installation in the next week or so.
26/07/02 I picked up the car from the painters today. I am very pleased with the results, almost a little too pleased. Now that the car looks so good it seems like a shame to risk damaging it on the track! I will however continue building it into a race car as I already have a tidy road car. I had the windscreen reinstalled this afternoon and spent the rest of the day putting the car back together so that it could be stored outside. Typically, the weather was poor and it rained all weekend but I did get most of the car put back together. The only exterior parts left to be attached are the rear bumper and the left rear wheel arch extension. I will take some photos when the car is finally back in one piece.
09/08/02 I painted the grille surround red today. The car didn't actually come with one - instead it had a red stripe around the grille. I also put the rear bumper and the rear wheel arch on and cleaned the car inside to get rid of the build up of dust from the painters.
10/08/02 Today I reinstalled the rear seat as well as the remaining pieces of trim. I also removed the front spoiler and straightened the lower front panel as well as reinstalled the spoiler.
11/08/02 I bought new stripes for the drivers side and put them on as per factory specifications. I also installed the grille along with the red surround and the VW badge that is now black once more. The motor is almost ready for installation - there are only a few small parts that will have to be sourced from the engine currently installed in the car (I have already sold this engine).

How the car looks now