[ Español ]
TDA3810
Introduction
TDA3810 is a one chip solution that provides stereo effects out of mono or stereo audio.
The circuit is quite simple and requires only some components but if we follow the Philips
datasheet schematic it turns out that pseudo-stereo mode produces very loud highly distorted
audio. Below the problem is shown and solved.
Schematic
Here is the schematic presented in the Philips datasheet and outlined in red the error that
prevents it from working properly. Pin numbering is wrong (above picture shows the original
wrong numbers), pins 3 and 5 must be swapped.
Document completed on July 2006 by Jeroni Paul.
Copyright © 2006 Jeroni Paul.
Back to main page