|
|
|
This means that the printer is open or no EP cartridge. 20 Paper Jam There was a paper jam in the input area 21 Paper Jam There was a paper jam in the area under the toner cartridge. 21 Paper Out Paper out or feed failed 22 Paper Jam There was a paper jam in the fuser or exit sensor section of the printer. 23 Short Paper Replace paper with proper size. 23 Paper Jam This is a duplex jam,check for paper jammed in duplexer. 24 Feed Failure The user attempted to feed through the manual feed port while the printer was feeding from an installed paper or envelope source. 24 Short Paper Replace paper with that of proper lenght. 26 Wrong Paper Size There is a paper jam caused by using the wrong paper size. 27 Change Paper Automatic paper sensing has determined that the paper installed isn't the size requested. 28 Load Paper Either there is no paper or there is a feed failure at the pickup. 29 Output Bin Full Remove the paper from the output bin, if that doesn't work power off the printer. 30 Top Cover Open Either you have a cover that is not quite shut or a cartridge is not properly seated or missing. 31 Change Paper The wrong size paper is being installed. 32 Wrong Print Cartridge Installed The installed print cartridge is not supported by the printer. 36 Load Paper The sensor has indicated that either the tray is empty or there's a feed failure. 37 Insufficient Collation Memory There is not enough memory in the printer to print the job. 38 Memory Full More memory may be required. 39 Complex Page The page is too complex to print. 40 Default Storage Error There has been a printer function error. 41 Requested Font Missing The user has requested a font that is not in memory. 43 Font Card Not Supported The installed font card is not supported by the printer. 51 Defective Flash An error has occurred in a flash simm. |
Send mail to [email protected]
with questions or comments about this web site.
|