BARRYS CARD MODELS PAGE
Down load this page to your printer or to a floppy disk,mount onto thin card with spraymount adhesive and cut out the parts with scissors or craft knife,give the wings a slight curve by rolling over sorbo rubber or similar with a domestic rolling pin or a silk screen printers roller obtainable from art shops etc.To assemble the model use small amounts of uhu adhesive applied with a cocktail stick and position parts with tweezers.To fit the tailplane cut a slot into the fuselage and fold one half of elevator back onto its self,slip into place and tack glue in situ.The centre section strut is represented with a clear piece of plastic such as from packaging items,if you prefer struts can be made from cocktail sticks cut to size and pointed ends glued into small holes in the top and bottom wings,undercarriages can also be made up from the cocktail sticks if desired.Prototype models have also been made by mounting pattern onto thin balsa wood as an alternative to card,the small balsa bundles obtainable from model shops are ideal for this purpose.
FLYING INSTRUCTIONS-Balance model where shown on the drawing with small amount of modelling clay,aim for a flat glide and adjust the elevator by bending between warm fingers,also correct any turning tendency with rudder or with slight bending of the wingtips one up the other down to represent aileron effect,above all have fun with your miniature air fleet and watch these pages for more models at intervals.
Card modelling has been around for a long time with some of the earliest examples appearing as incentives for advertising,many 1930's boys magazines and comics carried weekly parts of models to be assembled into a complete model these usually took the form of week one fuselarge,then the wings etc one of the first designers of these models was Wallis Rigby who created some wonderful card designs over the years,the scope was limitless and the small cost of building these models made them very popular,just recently card modelling has been given a new lease of life thanks to modern technology and the computer,all over the world people are designing models such as this and placing them onto the Internet for everyone to enjoy 
http://www.geocities.com/cloudancer7uk/index.html
BUILD A FOCKE WULF TA152-go to
http://www.geocities.com/paperpilotuk/index1.html
BUILD A FLEET 80 CANUCK-go to
http://www.geocities.com/paperpilotuk/index4.html
Hosted by www.Geocities.ws

1