Bevel = 1st row 2nd from the left Shininess = 40
Width = 9 Angle = 322
Smoothness =50 Intensity = 65
Depth = 20 Elevation = 47
Ambience = ( - 67 )
Then deselect, go to Selections / select all, then select the shelf and copy / paste it to the other side as new selection then deselect.
Next go to Layers / add new and name this layer door1.sel, then go to Effects / Inner Bevel and use these settings:
Bevel = 3rd row 2nd from the left Shininess = 56
Width = 17 Angle = 0
Smoothness = 2 Intensity = 24
Depth = 11 Elevation = 51
Ambience = ( - 42 )
While still selected Copy/ Paste to the other side, then deselect.
Now deselect and go to Layers / add new and name this layer door2.sel, flood fill with the wood pattern and go to Effects / Inner Bevel and use these settings:
Bevel = 1st row 1st one Shininess = 60
Width = 7 Angle = 66
Smoothness = 35 Intensity = 24
Depth = 11 Elevation = 51
Ambience = ( - 4 )
Brightness = ( - 255 ) Contrast = 5
Next got to Selections / Load from Disk / design2.sel. Now go to the color palette and in the HTML box type in FF40FF then flood fill the flower. Once you have done this Copy / Paste it to the other side and mirror. Then deselect.
We are now going to make the small details at the bottom of the doors. Go to detail1.sel and flood fill section then go to Effects / Inner Bevel and use these settings:
Bevel = 2nd row 3rd from left Shininess = 60
Width = 17 Angle = 321
Smoothness = 13 Intensity = 24
Depth = 9 Elevation = 51
Ambience = ( - 4 )
Copy / paste to the other side, then deselect
Finally go to Layers / add new name this layer detail3. Open the handle tube, copy and paste to the doors. Go to Selections / Load from Disk / hinge.sel and fill with black.
For the last step you can do the ROSEMAN insignia if you wish. I did this because it is part of a collection called the ROSEMAN SERIES. There will be tutorials for a kitchen, bedroom, and bath room. The ROSEMAN SERIES is my own design, it is just like the Chippendale Collection.
To do the insignia go to Layers / add new name this layer detail2. Then go to Selections / Load from Disk detailn2.sel, and flood fill with wood pattern. Next go to Effects / Inner Bevel and use the last settings ( the one we just used ). Except change the Bevel to 2nd row / 2nd from the left, and the Width to 9. Deselect and add text.
Now you�re done, I hope you had as much fun making this piece as I did. Thank you for trying my tutorial.
