|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAZDA MIATA SEATS
|
|
|
|
|
|
Page 4
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The next thing I did was to fabricate new plates for the aft mounting. I used 2" X 1/4" steel bar stock and cut pieces
3" long. Then, with the seat bottom
installed, place the plate under the aft end of the rail so that it covers the mount
hole. Mark position of the rail and holes on plate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remove the seats, drill holes in the plates and attach
them to the seat rails. Be sure to remember that you are
looking at the seat upside down, so be sure to
attach
them to the proper side. I used 1/4" X 3/4" hex head
bolts and nuts. Anything longer than that would restrict
the rail slide movement entirely.
|
|
|
|
|
|
|
|
|
|
NEXT PAGE
|
|
|
PREVIOUS PAGE
|
|
|
BACK TO TECH
TIPS
|
|
|
HOME
|
|
|
|
|
|
|
� Copyright 2000, Geoffry L. Bush
|
|
|
|
|
|
|