|
Radial Tuned Suspension (RTS) had its biggest impact on the GTS, which with a mesh grille, subtle body stripes and detailing on optioned-up versions, revived aspects of the HG Monaro GTS. A four-headlight nose, body colour front and rear spoilers and bumpers and sports wheels also helped to make it more of a stand-alone package in the Monaro tradition. The GTS came standard as a 4.2 V8, but you could add the 5.0 litre, power steering, plaid cloth seats, limited slip diff, electric windows and air-conditioning. Rear disc brakes were standard, seven inch polycast wheels or spoked wire wheels were optional. The HZ GTS was ranked by many as Australia's premier performance car, a position that was consolidated in May 1978 when the 5.0 litre V8 became standard. DATE OF INTRODUCTIONOctober 1977MODELSMonaro GTS Four Door SedanPRICES AT TIME OF INTRODUCTION4.2 litre four speed manual - $8482OPTIONS 5.0 litre V8 - $237 Limited slip diff - $93 Power steering - $253 TOTAL NUMBER BUILTMonaro GTS Four Door Sedan - n/aENGINES4.2 litre (253 ci)Bore and stroke 3.625 inches (88.8 mm) x 3.062 inches (75.0 mm) OHV with hydraulic lifters, single camshaft Twin barrel Stromberg carburettor Power output (DIN) 130 kW) at 4800 rpm Torque (DIN) 325 Nm at 3000 rpm Compression ratio 9.4:1 5.0 litre (308 ci) Bore and stroke 4.0 inches (101.6 mm) x 3.062 inches (75.0 mm) OHV with hydraulic lifters, single camshaft Twin barrel Stromberg carburettor Power output (DIN) 186 kW at 5000 rpm Torque (DIN) 434 Nm at 3400 rpm Compression ratio 9.7:1 TRANSMISSIONSFour speed all synchro manualThree speed Turbo Hydra-Matic '400' automatic. REAR AXLE RATIOS3.55:13.08:1 ENGINE/TRANSMISSION COMBINATIONSFour speed manual standard with 4.2, not available with 5.0.Four speed high performance manual standard with 5.0 and optional with 4.2. Hydra-Matic optional with both 4.2 and 5.0 STEERINGRecirculating ball. (Power assisted from May 1978)BRAKESFront Power assisted discsRear Power assisted discs EXTERIOR DIMENSIONSTotal length (inches/mm):190.3 inches (4834 mm)Total width (inches/mm):73.9 inches (1877 mm) Total height (inches/mm) at kerb weight:53.7 inches (1364 mm) Wheelbase (inches/mm):111.0 inches (2719.5 mm) Front track (inches/mm):59.8 inches (1518 mm) Rear track (inches/mm):60.5 inches (1537 mm) KERB WEIGHT1475 kg (3253 lbs)TURNING CIRCLE12.1 m (39.7 ft)FUEL TANK CAPACITY75 litres (16.6 imp. gallons)ENGINE NUMBERSV8s - Top left of block.BODY/CHASSIS NUMBERSLocated right side front of frame.The first four digits are the model number 8Q69 - Monaro GTS Sedan The next letter is the engine identification R - QR 253 (high compression 4.2 litre) T - QT 308 (high compression 5.0 litre) The next letter is the model year G - 1977 H - 1978 J - 1979 The next two digits is the assembly plant code H1-H4 - Brisbane H5-H9 - Sydney J1-J9 - Dandenong L1-L5 - Adelaide The next five numbers is the vehicle serial number which represents the sequence in which the vehicle was built at the particular plant. The final letter is the series code Z for HZ OTHER IDENTIFICATION MARKSSquares for grille with GTS badge in centre. Dual headlights in black surround with parklights/indicators on side. Black rubber bumper strips. Front air dam and rear boot spoiler. Three slot vent under GTS badge in front guards. GTS and engine size badge on rear panel.
|