|
Page 1
2 |
 |
1. PCI Specification Revision 2.1 compliant
2. Compatible with standard 16C550 UART with 16 byte
transmit-receive FIFO
3. Fast data rates up to 1 Mbytes/sec
4. DB9 serial port connector x 2
5. Pin header serial port connector x 2
|
|
PCI to RS-232 2Port |
 |
1. Provide Bus Master function OHCI Interface
specification
2. IEEE 1394-1955 Compliant and Compatible with proposal 1394A
3. Compliant to Lastest PCI specification, PCI 2.2 & PCI Power
Managament Complication
4. Support Serial Bus Data Transfer Rates of 100, 200 and 400
Mbps.
5. Max 63 (4pin or 6pin) computer and comsumer device
connection. More |
|
PCI to Firewire 3Port |
 |
1. Serial ATA(SATA) host
controller chip with 32-bit interfacing
2. Compliant with serial ATA 1.0 specification
3. Supports two independent serial ATA ports with data
transfer rate up to 1.5Gb/s
4. Built-in 256 byte FIFO per port for fast read/write
operations
5. Supports Microsoft generic IDE operation and intel nus
master DMA operations. |
|
PCI to 1 IDE & 3 SATA |
 |
1. Use any miniPCI card (WIFI
radios, etc) in a standard PCI slot.
2. High quality gold fingers ensures high reliability.
3. Compatible with any mini-PCI card.
4. Support All Operating System , Plug and Play.
5. Let your MiniPCI wireless card to use on your desktop
computer by PCI slot. More
|
|
PCI to
mini-PCI |
 |
1. Truly Compatible with PCMCIA
2.1 / JEIDA 4.2
2. Provide rear access slot and support PCMCIA cards (like ATA
Flash card, PC Card Adapter, Bluetooth & Wireless LAN Card,
etc)
3. Support Type I, Type II and Type III PC Cards
4. Support all kind of PC Card Hot-Swapping feature and cards
can be inserted / extracted dynamically without shutting down
the system.
5. Comply wth PCI Local Bus specification 2.2 |
|
PCI to
PCMCIA |
 |
1. Compliant with Universal
Serial Bus Specification Revision 2.0
2. Compliant with Open Host Controller Interface Specification
for USB Rev 1.0a
3. Compliant with Enhanced Host Controller Interface
Specification for USB Rev 0.95.
4. Support high-speed [480Mbps], full-speed [12Mbps] and low
speed [1.5Mbps] data transfer rate.
5. 32-bit 33MHz host Interface compliant to PCI specification
release 2.2 More |
|
PCI to
USB2.0 4+1Port |
