Is it something from H.P. Lovecrafts Culthulhu Stories?.... Nope...
May.20.01
My new fabricator had to come up with this design because of a few clearance issues, but get this, this is a TRUE 3" downpipe with a TRUE 3" Flexpipe...
I don't care what anyone says, this bad bastard looks awesome...
The O2 sensor is located on the botton of the join immediately after the turbine flange. It shows as a black little "nub"
I'm getting beadblasted to clean all of the weld heat burns then it's off to the Heat Coating shop to get a nice coat of Ceramic to retain heat and the sort.
Starting at the left:
This is the return path for the water line (hot) following the circulation of the coolant, this was a great spot to tap in the coolant return line.
Next over: Here is the Tial wastegate mounted, as you can see, this is partially the reason for the convoluted path for the downpipe.
Next over: This is the oil feed line
Next over: This fitting is the collant feed line,
Over hear for last, last updates and pics
