Want To See Some Pics of My Truck? Click Here! Also Click 'Step By Step' in the navigation on the left to be guided through as I customize my truck! You will be detailed on everything I do and the easiest way(s) to do it. Also will list the parts I use(d) and a link to where I got it. My truck is a 89 Silverado SS-350 which will fit most parts from 88-98. Me and Mark brought my truck to his jobs shop...this may take a lil to load.. Front of my truck.. Truck Angle... Hood.. The hood chipping and rusting.. Me sanden the hood.. After its sanded, Mark taping all everything off.. An upper view of my truck sanded... Wet Primer.. Primed and Complete! ..for now.. The hood alone took me about 7-8 hours, the fenders took about 5-15 minutes because I had to remove some trim. The hood took so long because there were all these layers: Clear coat, black, primer, black, primer, blue, primer, red, primer, metal. Dont know why so many layers...but Mark also installed my "Tailgate Handle Remover"..which can be found under "Step by Step" on the Navigation!