rebellioner!!!
------WELCOME TO THE JUNGLE!!!------
*4-15-14-'20___11-5-20___20-8-5-13___2-5___21-16-16-15-14___25-15-21!!!*
In this page you can find:
--HOW TO MAKE A BOMB:--
-5 BOMBS:
The Best of The Station
By: liquidfire
<-> Mace Substitute <->
3 PARTS: Alchohol
1/2 PARTS: Iodine
1/2 PARTS: Salt
Or:
3 PARTS: Alchohol
1 PARTS: Iodized Salt (Mortons)
It's not actual mace, but it does adamn good job on the eyes...
<-> CO2 Canister Bomb <->
Take a Co2 canister and cut the top almost off
but leave a little to form a hinge.
Let out the Co2 and insert a M80 into it. Insert fuse throught hole in top. Close the top by welding or epoxy glue. When ready to ignite justlight... Pretty neat eh?
<-> Unstable Explosives <->
Mix solid Nitric Iodine with househould ammonia. Wait overnight and thenpour off the liquid. You will be left with a muddy substance. Let this drytill it hardens. Now throw it at something!!!!
<-> Jug Bomb <->
Take a glass jug, and put 3 to 4 drops of gasoline into it. Then put the capon, and swish the gas around so the inner surface of the jug is coated. Thenadd a few drops of potassium permanganate solution into it and cap it. To blowit up, either throw it at something, or roll it at something.
<-> Hindenberg Bomb <->
Needed:
1 Balloon
1 Bottle
1 Liquid Plumr
1 Piece Aluminum FoilL
1 Length Fuse
Fill the bottle 3/4 full with Liquid Plumr and add a little piece of aluminumfoil to it.
Put the balloon over the neck of the bottle until the balloon is
full of the resulting gas. This is highly flammable hydrogen. Now tie thebaloon.
Now light the fuse, and let it rise.When the fuse contacts theballoon, watch out!!!
-MAKE A CO2 BOMB:
You will have to use up the cartridge first by either shooting it or whatever.
With a nail, force a hole bigger so as to allow the powder and wick to fit in easily.Fill the cartridge with black powder and pack it in there real good by tapping the bottom of the cartridge on a hard surface (I said TAP not SLAM!). Insert a fuse. I recommend a good water-proof cannon fuse, or an m-80 type fuse, but firecracker fuses work, if you can run like a black man runs from the cops after raping a white girl.) Now, light it and run like hell! It does wonders for a row of mailboxes (like the ones in apartment complexes), a car (place under the gas tank), a picture window (place on window sill), a phone booth (place right under the phone), or any other devious place. This thing throws shrapnel, and can make quit a mess!!
-MATCH HEAD BOMB:
Take a tennis ball and about 4-5 packs of red tipped matches(strike anywhere)(non-safety), you have to cut the heads off the all the matches, throw away the sticks and keep the heads, now make a small hole in the tennis ball and put all the match heads inside. Next glue the ball back together. Now when someone bounces this bitch off the ground the matches rub off each other and ignite make for one hot tennis ball.
-DISKETTE BOMB:
Take an ordinary floppy disk and some red tippede matches, scrape the sulpher off the top, now slide back the metal thing on the disk and place the red dust in here, now carefully put the slide back into position. Give it to someone you hate and tell them there is porn on it or something, when they put it into their computer the slide will rapidly move back igniting the dust and burning out the inside of their computer.
-MOLOTOV:
A different kind of Molitoff Cocktail by liquidfire.
Here is how you do it: - Get a coke bottle & fill it with gasoline about half full - Cram a piece of cloth into the neck of it nice and tight - Get a chlorine tablet and stuff it in there. You are going to have to force it because the tablets are bigger than the opening of the bottle. - Now find a suitable victim and wing it in their direction. When it hits the pavement or any surface hard enough to break it, and the chlorine and gasoline mix..... BOOM!!!!!! Have fun!
-SMOKE BOMB:
Smoke Bombs by the liquidfire.
Here is the recipe for one helluva smoke bomb! 4 parts sugar 6 parts potassium nitrate (������� �����)(Salt Peter) Heat this mixture over a LOW flame until it melts, stirring well. Pour it into a future container and, before it solidifies, imbed a few matches into the mixture to use as fuses. One pound of this stuff will fill up a whole block with thick, white smoke!
-THERMITE 2:
Thermite is nasty shit. Here is a good and easy way to make it. The first step is to get some iron-oxide (which is RUST!). Here is a good way to make large quantities in a short time: - Get a DC convertor like the one used on a train set. Cut the connector off, seperate the wires, and strip them both. - Now you need a jar of water with a tablespoon or so of sodium chloride (which is SALT!) added to it. This makes the water conductive. - Now insert both wires into the mixture (I am assuming you plugged the convertor in...) and let them sit for five minutes. One of them will start bubbling more than the other. This is the POSITIVE(+) wire. If you do not do this test right, the final product will be the opposite (chemically) of rust, which is RUST ACID. You have no use for this here (although it IS useful!). - Anyway, put the nail tied to the positive wire into the jar. Now put the negative wire in the other end. Now let it sit overnight and in the morning scrape the rust off of the nail & repeat until you got a bunch of rust on the bottom of the glass. Be generous with your rust collection. If you are going through the trouble of making thermite, you might as well make a lot, right? - Now remove the excess water and pour the crusty solution onto a cookie sheet. Dry it in the sun for a few hours, or inside overnight. It should be an orange-brown color (although I have seen it in many different colors! Sometimes the color gets fucked up, what can I say... but it is still iron oxide!) - Crush the rust into a fine powder and heat it in a cast-iron pot until it is red. Now mix the pure iron oxide with pure alluminum filinos which can be bought or filed down by hand from an aluminum tube or bar. The ratio or iron oxide to aluminum is 8 grams to 3 grams. - Congrats! You have just made THERMITE! Now, to light it... - Thermite requires a LOT of heat (more than a blow torch!) to ignite. However, a magnesium ribbon (which is sorta hard to find.. call around) will do the trick. It takes the heat from the burning magnesium to light the thermite. - Now when you see your victim's car, pour a fifty-cent sized pile onto his hood, stick the ribbon in it, and light the ribbon with the blow torch. Now chuckle as you watch it burn through the hood, the block, the axle, and the pavement. BE CAREFUL! The ideal mixtures can vaporize CARBON STEEL! Another idea is to use thermite to get into pay phone cash boxes. HAVE FUN!!
-FUCK THE LOCKS:
Picking Master Locks Have you ever tried to impress someone by picking one of those Master combination locks and failed? The Master lock company made their older combination locks with a protection scheme. If you pull the handle too hard, the knob will not turn. That was their biggest mistake. The first number: Get out any of the Master locks so you know what is going on. While pulling on the clasp (part that springs open when you get the combination right), turn the knob to the left until it will not move any more, and add five to the number you reach. You now have the first number of the combination. The second number: Spin the dial around a couple of times, then go to the first number you got. Turn the dial to the right, bypassing the first number once. When you have bypassed the first number, start pulling on the clasp and turning the knob. The knob will eventually fall into the groove and lock. While in the groove, pull the clasp and turn the knob. If the knob is loose, go to the next groove, if the knob is stiff, you have the second number of the combination. The third number: After getting the second number, spin the dial, then enter the two numbers. Slowly spin the dial to the right, and at each number, pull on the clasp. The lock will eventually open if you did the process right. This method of opening Master locks only works on older models. Someone informed Master of their mistake, and they employed a new mechanism that is foolproof (for now). The older models are from 1988-1990. The newer models are being cracked on as we speak..
FOR ADDITIONAL INFORMATION:
[email protected]
|
