Shooting can last until figure "12" appears in the picture
counter window or ¨16¨ if the back is for 6X4.5 frames.
This number indicates that the film has been fully used.
After
this is shown fully
insert the magazines dark slide 29 and remove the magazine from the
camera.
Lift knob 25
and rotate it in the direction of the arrow until the film has been
fully wound onto
the take-up spool.
The winding should be carried out smoothly and without
seizure.
In the unlikely event that the film will not fully transport over to
the
take up spool when winding on in this manner it is essential to stop
the winding , extract the
transport
mechanism in a dark room and eliminate the cause of the film
seizure.
Check that the film winding-on is complete by looking into window 38.
Lift
and turn
the handle 28 fully anti-clockwise.
Remove the transport mechanism 33 from the magazines outer body. Lift
plate 37,
remove the
spool with exposed film and glue the leader with the paper label
provided on the end of the films roll.
Return plate 37 to it's initial
position , install the transport mechanism back into the magazine and
close the
magazines lock.
