previous page in this TTL Meter
Guide
While looking through the viewfinder at your subject rotate this big
outer knob , while watching the LED's.
You will see the LED's illuminated on the right or left , then at some
position of the dial they will swap sides.
You have actually just gone past the point of correct exposure so
slowly turn it back again and you will see that for a very short time
BOTH LED's are ON.
Leave the dial in that exact position and look at what it now shows.
The example above indicates a selection of suitable exposure speeds and
aperture openings.
Some of the choices are below , look at the list and see how it relates
to the dial ....
1/125sec with f2.8
1/60sec with f4
1/30sec with f5.6
1/15sec with f8
1/8sec with f11
1/4sec with f16
Simply set the aperture ring on the lens and use the corresponding
shutter speed , and your all done ,,, a perfect exposure.
return to the manuals menu
