ORDER NOW-$5.00 PER RESIDUE OR $45.00 PER PEPTIDE, 864+ PEPTIDES DELIVERY IN 2->5 DAYS, DIAGNOSTIC KITS, ANTIBODIES, PHARMACEUTICALS, DNA/RNA APPLICATIONS, GENE CHIPS, PIPETTE TIPS, PCR PLATES, MICROCENTRIFUGE TUBES, DEEP WELL PLATES, SEPARATION COLUMNS, SPIN COLUMNS, RACKS, GMP LABORATORY SUPPLIES, ETC.!

[email protected]

Hi! We're the Peptides Wholesale Company, your collaborator in Wholesale peptides, proteins, amino acids, antibodies, resins, nucleic acids, pharmaceuticals, organic molecules, reagents, GMP, GLP, ISO, ICH, (( peptide, protein, amino acid, antibody, resin, nucleic acid, pharmaceutical, organic molecule, reagent )) for support to Research and Manufacturing Production.

The peptides wholesale company is the only LEADING Wholesale Brokerage for synthetic peptides, proteins, amino acids, antibodies, resins, nucleic acids, pharmaceuticals, organic molecules, reagents, GMP, GLP, ISO, ICH, research, production, (( peptide, protein, amino acid, antibody, resin, nucleic acid, pharmaceutical, organic molecule, and reagent )) synthesis and combinatorial chemistry. The peptides wholesale company is lead by a Ph.D. chemist with over 33+ years experience in the biotech, peptide, and pharmaceutical industries. The concept of our brokerage is to ensure that you get the highest quality of product, fastest delivery, and lowest prices possible. All you have to do is fill in the order form below (you must copy the text of the form and paste it into the body of your e-mail). We will submit your order in accordance to the order requirements to many manufacturers and will invite them to bid. Once we get all the bids back within one business day, we will inform you of the lowest price and the best quality manufacturer. Upon acceptance, the manufacturer will be notified to start production. This website truly has it all for your every research and production need! See what you get below! CUSTOM PEPTIDE AND PRODUCT PRODUCTION *Peptide-Protein Conjugation *Quantities to Kilograms *Multiple Disulfide Bridges *Complex Peptide/Peptidomimetics *Special amino acids and their derivatives *Phosphorylated/Biotinylated Structures *Peptide labelling AMC, aldehyde, CMK *Purity from 80% -99%, fitting your needs *Chromogenic/Flurogenic Substrates *Solid Phase/Solution/Segment Coupling Technologies *Process Development GMP QUALITY GRADE PEPTIDES AND PRODUCTS At peptides wholesal company, our inspected and approved GMP facilities cater to large scale manufacturing of pharmaceutical drug substances and clinical research products. GMP manufacturing is carried out in strict adherence to the FDA regulations 21 CFR part 210, 211, 600, 610, 820; ICH guidelines, and ISO-9001:2000. Manufacturing facilities are personally audited by us. Their SOP's Standard Operating Procedures) are audited by us for ensuring that they are strictly followed and meticulously documented by trained production staff, QA/QC staff, and highly qualified specialists in the production and quality processes. Training records are evaluated. Regulatory adherence will be monitored and audited as well. Adherence to all regulatory and customer requirements are ensured as that your GMP product order will only be placed with certified facilities. You can count on us to provide you with complete documentation and regulatory support! Our commitment to quality is reflected throughout the manufacturing process by the requirements placed in the order form below. Starting materials of the best quality are to be purchased from qualified vendors and carefully evaluated by QA/QC prior to their use. In the end, the final product is subjected to a battery of analytical tests using validated methods. You can be assured of a consistent, reliable, and timely supply of ultra-pure GMP-Quality grade peptide. Every batch of GMP product is provided with a lot specific COA (Certificate of Analysis). A typical COA contains the following information: *Peptide Name *Batch Number *Catalog Number (if any) *Sequence *Appearance *Solubility *Purity by Gradient HPLC or by GC/MS (for small organic molecules) *Purity by Capillary Electrpohresis *Purity by TLC (Thin Layer Chromatography) *Calculated Average Theoretical Mass *Molecular Weight by M.S. *Peptide Content *Amino Acids Analysis *Amount Packed (net peptide or gross weight): *UV scan from 200 nm to 600 nm *Water Content *Acetate Analysis *Trifluoroacetate Analysis *Fluoride Content *Residual Solvents *Mass Balance (P.C. + Counter Ion + H2O) *Bioburden Analysis *Impurities by gradient HPLC/MS or GC/MS *Endotoxin *Stability Testing (optional) *Salt Form (Acetate, TFA, or Cl) *Sequence Confirmation by HPLC/MS/MS or by Edman Degradation *Melting Point *FTIR *Other (not specified) *Optical Rotation *NMR For Antibody Work *ELISA *Conjugation (BSA, KLH, or Other) *Affinity Purification *Cell Culture *Other (not specified) CATALOG PEPTIDES and PRODUCTS We do not recommend ordering products that are catalog peptides, proteins, amino acids, antibodies, resins, nucleic acids, pharmaceuticals, organic molecules, reagents, GMP, GLP, ISO, ICH, research, production, (( peptide, protein, amino acid, antibody, resin, nucleic acid, pharmaceutical, organic molecule, reagent )) as that they tend to stay in frozen storage for a long time and may degrade. Your best choice is to order custom peptides and products through our brokerage for the highest quality and lowest price possible. Catalog products, in any event, are available for immediate delivery. AMINO ACIDS, DERIVATIVES, RESINS, ORGANIC MOLECULES Order Boc/Fmoc amino acids and derivatives, resins, and organic molecules below. These are to be the highest quality of purity >99.0% gradient HPLC or GC/MS purity. ORDER FORM-Start Copying Here & Paste to Your E-mail ([email protected]). NOTE: If you are ordering a small organic molecule NOT covered by the information below, draw a picture of the molecule, scan it, save as a "JPEG" file, and E-Mail it as an attachment to your order. Check off which services you require below, including just analytical support. *Reference Number: *Rush Order: *Name of Company: *Name of Person Placing Order: *Company Adress: *Telephone #: *Fax #: *E-Mail Address: *Sequence (see below for letter code)(Amino Acids are in "L" form below-you must specify "D" form when required): *Appearance (should be fluffy white unless there's a chromophore attachment): *Solubility: *Purity by Gradient HPLC or by GC/MS (see NOTES below): *Purity by Capillary Electrpohresis (see NOTES below): *Purity by TLC (Thin Layer Chromatography): *Calculated Average Theoretical Mass: *Molecular Weight by M.S. +/- 1.0 Dalton of Theoretical Mass (see NOTES below): *Peptide Content: *Amino Acids Analysis (See NOTES below): *Amount to be Packed (net peptide or gross weight)(See NOTES below): *UV scan from 200 nm to 600 nm: *Water Content: *Acetate Analysis: *Trifluoroacetate Analysis: *Fluoride Content: *Residual Solvents: *Mass Balance: (Peptide Content + Counter Ion + H2O): *Bioburden Analysis: *Impurities by gradient HPLC/MS or GC/MS (see NOTES below): *Endotoxin: *Stability Testing: *Salt Form (Acetate, TFA, or Cl): *Sequence Confirmation by HPLC/MS/MS or by Edman Degradation: *Melting Point: *FTIR: *Optical Rotation: *Other (not specified)(please specify): *NMR: For Antibody Work (see NOTES below) *ELISA: *Conjugation (BSA, KLH, or Other): *Affinity Purification: *Cell Culture: *Other (not specified)(please specify): NOTES: 1. HPLC gradient shall be run at 214 nm detection on one of the following: (a) C-18 reversed phase column, 3 micron particle size, 4.6 mm width X 150 mm length, 100 Angstrom pore size, flow=1.0 ml/minute, gradient=95%A/5%B->0%A/100%B in 30 minutes (Buffer "A"=99.9% Type I Deionized Water and 0.1% TFA (Trifluoroacetic Acid) and Buffer "B"=99.9% HPLC or nanograde Acetonitrile and 0.1% TFA); (b) Cyano Column (if product is hydrophobic), 5 micron particle size, 4.6 mm width X 250 mm length, 100 Angstrom pore size, flow=1.0 ml/minute, gradient=95%A/5%B->0%A/100%B in 30 minutes; (c) Silica Normal Phase Column (if product is hydropholic), 5 micron particle size, 4.6 mm width X 250 mm length, 100 Angstrom pore size, flow=1.0 ml/minute, gradient=0%A/100%B->1000%A/0%B in 30 minutes; 2. Mass Spec for peptides and amino acids can be performed by ESI (electrospray ionization (+ or - mode)) or MALDI (Matrix Assisted Laser Desorption Ionization (+ or - mode)), however, results must be +/- 1.0 Dalton of the calculated theoretical average mass. No impurity displayed in the mass spectrum can exceed 25% abundance. 3. For Mass Spec of GMP peptides LC/MS/MS must be run with one of the above 3 HPLC run protocols and the sequence can be confirmed by MS/MS (Edman degradation is optional, however, but can be expensive). 4. For small organic molecules and solvents can be determined by GC/MS as follows: Column=DB5 (5% Phenylmethylsilicone), 30 meters long, 0.32 mm i.d., ultrapure grade Helium flow=1.0->2.0 ml/minute, 25:1 split, 40 degrees C for 6 minutes, 20 degrees C/minute temperature increase, 250 C degrees for 10 minutes, Detector=280 degrees C. 5. For GMP products, product purity must be >98.0% and raw material purity must be >99.0%, no impurity can be >1.0%, and all impurities >0.1% must be identified by LC/MS/MS or GC/MS. 6. For Capillary Electrophoresis analysis, 0.2 milliMolar Sodium Tetraborate (pH=9.3), Silica Capillary Column=105 cm. length X 50 um I.D., a voltage gradient of 10.0 K.V.->30 K.V. in 20 minutes and hold 30 K.V. for 10 minutes (30 minute run time total), a 5 minute preconditioning step with the Borate buffer, and a detection setting at 220 nm should be used. The sample can be dissolved in 50% Buffer A/50% Buffer B (see NOTE #1 above for the components of "Buffer A & B), Formic Acid, or TFA (Trifluoroacetic Acid). 7. For Antibody work, the peptide purity must be at least 70% by HPLC (as depicted above)and/or Capillary Electrophoresis (optional) to elicit a good immune response from the host animal). 8. For Amino Acid Analysis, the acceptable analytical Peptide Content results will be +/- 5.0% of the theoretically calculated Peptide Content, and the individual amino acid components will be +/- 10% of the theoretically calculated numbers of amino acids in the sequence (unless otherwise partially or full destroyed in the hydrolysis steps of the analysis, upon which, a notation on the certificate of analysis would reflect this condition). 9. For net peptide weight, amino acid analysis must be performed to derive the Peptide Content. The peptide gross weight contains peptide + salts + water (moisture) + residual solvents. Thus gross peptide weight to be measured=Amount of (peptide desired/peptide content)*100. END OF ORDER FORM-Stop Copying Here Links To Other Sites On The Web <--CHECK OUT THE COMPREHENSIVE REFERENCE LINKS BELOW!--> KEYWORD peptides, proteins, amino acids, antibodies, resins, nucleic acids, pharmaceuticals, organic molecules, reagents, GMP, GLP, ISO, ICH, research, production, peptide, protein, amino acid, antibody, resin, nucleic acid, pharmaceutical, organic molecule, reagent Reference Link #1**CLICK HERE** Reference Link #2**CLICK HERE** Reference Link #3**CLICK HERE** Reference Link #4**CLICK HERE** Reference Link #5**CLICK HERE** Reference Link 6**CLICK HERE** Reference Link #7**CLICK HERE** Reference Link #8**CLICK HERE** CHEMICAL ABBREVIATIONS FOR SEQUENCE INPUT ABOVE A=Alanine R=Arginine N=Asparagine D=Asparatic Acid C=Cysteine E=Glutamic Acid Q=Glutamine G=Glycine H=Histidine I=Isoleucine L=Leucine K=Lysine M=Methionine F=Phenylalanine P=Proline S=Serine T=Threonine W=Tryptophan Y=Tyrosine V=Valine Abu=L-a-Aminobutyric acid Abz=2-Aminobenzoyl (Anthraniloyl) Ac=Acetyl Acm=Acetamidomethyl Admoc=1-(1'-Adamantyl)-1-methylethoxycarbonyl AFC=7-Amido-4-trifluoromethylcoumaryl Ahx=6-Aminohexanoic acid (n-caproic acid) Aib=a-Aminoisobutyric acid (a-Methyl-alanine) Aloc=Allyloxycarbonyl AMC=7-Amido-4-methylcoumaryl Asu=L-a-Aminosuberic acid (L-2-Aminooctanoic acid) BHA Benzhydrylamine Boc(t-Boc)=t-Butyloxycarbonyl Bom=Benzyloxymethyl BOP=Benzotriazole-1-yl-oxy-tris(dimethylamino)phosphonium hexafluorophosphate Bpa=4-Benzoyl-L-phenylalanine Bpoc=2-(4-Biphenyl)isopropyloxycarbonyl BSi=t-Butyldimethylsilyl Bz=Benzoyl Bzl=Benzyl Cbz (Z)=Benzyloxycarbonyl CDI=1,1'-Carbonyldiimidazole CHA=Cyclohexylammonium salt Cha=b-Cyclohexyl-L-alanine Chg=L-Cyclohexylglycine Cit=L-Citrulline Dab=L-a,g-Diaminobutyric acid DABCYL=4-(4-Dimethylaminophenylazo)benzoyl Dap=L-a,b-Diaminopropionic acid DCC=N,N'-Dicyclohexylcarbodiimide DCHA=Dicyclohexylammonium salt DBU=1,8-Diazobicyclo[5.4.0]undec-7-ene Dde=1-(4,4-Dimethyl-2,6-dioxocyclohex-1-ylidene)ethyl Ddz=a,a-Dimethyl-3,5-dimethoxybenzyloxylcarbonyl DEA=Diethylammonium salt DIC=1,3-Diisopropylcarbodiimide DIEA=Diisopropylethylamine Dif=L-Diphenylalanine DMA=N,N-Dimethylacetamide DMAP=4-Dimethylaminopyridine DMF=N,N-Dimethylformamide Dmob=2,4-Dimethoxybenzyl DMS=Dimethylsulfide DMSO=Dimethylsulfoxide Dnp=2,4-Dinitrophenyl Dpm=Diphenylmethyl EDANS=5-[(2-Aminoethyl)amino]naphthalene-1-sulfonyl EDT=1,2-Ethanedithiol EEDQ=2-Ethoxy-1-ethoxycarbonyl-1,2-dihydroquinoline Et=Ethyl FA=3-(2-Furyl)acryloyl FITC=Fluorescein isothiocyanate Fm=Fluorenylmethyl Fmoc=9-Fluorenylmethyloxycarbonyl For=Formyl Gla=g-Carboxy-L-glutamic acid HATU=O-(7-Azabenzotriazole-1-yl)-1,1,3,3-tetramethyluronium hexafluorophosphate HBr=Hydrobromic acid HBTU=O-(Benzotriazole-1-yl)-1,1,3,3-tetramethyluronium hexafluorophosphate HCl=Hydrochloric acid HFIP=Hexafluoroisopropanol HMBA=4-Hydroxymethylbenzoic acid HMPA=4-Hydroxymethylphenoxyacetic acid HOAt=1-Hydroxy-7-azabenzotriazole HOBt=1-Hydroxybenzotriazole Homoarg=L-Homoarginine (L-a-Amino-e-guanidinohexanoic acid) Homocit=L-Homocitrulline (L-a-Amino-e-ureidohexanoic acid) Homocys=L-Homocysteine (L-a-Amino-g-mercaptobutyric acid) Homophe=L-Homophenylalanine (L-a-Amino-g-phenylbutyric acid) Homopro=L-Homoproline (L-Pipecolic acid) Homoser=L-Homoserine (L-a-Amino-g-hydroxybutyric acid) Homotyr=L-Homotyrosine [L-a-Amino-g-(4-hydroxyphenyl)butyric acid] HONB=N-Hydroxy-5-norbornene-endo-2,3-dicarboximide Hyp=trans-4-Hydroxy-L-proline cis-Hyp=cis-4-Hydroxy-L-proline MBHA=4-Methylbenzhydrylamine Mbs=4-Methoxybenzenesulfonyl Mbzl=4-Methylbenzyl Mca=(7-Methoxycoumarin-4-yl)acetyl Me=Methyl MeOSuc=Methoxysuccinyl Met(O)=L-Methionine sulfoxide Met(O)2=L-Methionine sulfone Mmt=4-Methoxytrityl 4MbNA=4-Methoxy-b-naphthylamide Mob=4-Methoxybenzyl Msc=(2-Methylsulfonyl)ethyloxycarbonyl Mtr=4-Methoxy-2,3,6-trimethylbenzenesulfonyl Mts=Mesitylene-2-sulfonyl Mtt=4-Methyltrityl Mu=4-Morpholinecarbonyl aNA=a-Naphthylamide bNA=b-Naphthylamide pNA=p-Nitroanilide 1-Nal=b-(1-Naphthyl)-L-alanine 2-Nal=b-(2-Naphthyl)-L-alanine Npg=L-Neopentylglycine (b-t-Butyl-L-alanine) NHtBu=N-t-Butylamide NHEt=N-Ethylamide NHMe=N-Methylamide NHNH2=Hydrazide NHOH=Hydroxamate NMe2=N,N-Dimethylamide NMP=N-Methylpyrrolidine NO2=Nitro Nps=2-Nitrophenylsulfenyl NPys=3-Nitro-2-pyridinesulfenyl OtBu=t-Butyl ester OBzl=Benzyl ester OcHex=Cyclohexyl ester OcPent=Cyclopentyl ester ODhbt=3,4-Dihydro-3-hydroxy-4-oxo-1,2,3-benzotriazine ester ODmb=2,4-Dimethoxybenzyl ester OEt=Ethyl ester OFm=Fluorenylmethyl ester OHex=Hexyl ester Oic=L-Octahydroindole-2-carboxylic acid OMe=Methyl ester ONp=p-Nitrophenyl ester OPcp=Pentachlorophenyl ester OPfp=Pentafluorophenyl ester OPh=Phenyl ester OSu=N-Hydroxysuccinimide ester pSer=Phospho-L-serine pThr=Phospho-L-threonine pTyr=Phospho-L-tyrosine Pac=Phenylacetyl PAM=Phenylacetamidomethyl Pbf=2,2,4,6,7-Pentamethyldihydrobenzofuran-5-sulfonyl PEG=Polyethylene glycol Pen=L-Penicillamine (b,b-Dimethyl-L-cysteine) Phg=L-Phenylglycine Pmc=2,2,5,7,8-Pentamethylchroman-6-sulfonyl iPr=iso-Propyl Pra=L-Propargylglycine <>Pro=3,4-Dehydro-L-proline Pyr (pGlu)=L-Pyroglutamic acid Pz=4-Phenylazobenzyloxycarbonyl Sar=Sarcosine (N-Methylglycine) StBu=t-Butylthio SBzl=Thiobenzyl ester SEt=Ethylthio Suc=Succinyl tBu=t-Butyl TBTU=O-Benzotriazole-1-yl-1,1,3,3-tetramethyluronium tetrafluoroborate TEA=Triethylamine TFA=Trifluoroacetic acid Tfa=Trifluoroacetyl TFE=2,2,2-Trifluoroethanol TFFH=Tetramethylfluoroformamidinium hexafluorophosphate TFMSA=Trifluoromethanesulfonic acid Tic=L-1,2,3,4-Tetrahydroisoquinoline-3-carboxylic acid Tle=L-t-Leucine (L-t-butylglycine) Tmob=2,4,6-Trimethoxybenzyl TMSOTf=Trimethylsilyloxytrifluoromethanesulfonate TMR=Tetramethylrhodamine Tos=Tosyl (4-Toluenesulfonyl) Trt=Trityl Xan=Xanthyl Z (Cbz)=Benzyloxycarbonyl FastCounter by bCentral Metanet Web Hosting. Get www.YourName.com for only $8.95/month! Many major pharmaceutical and biotech companies routinely utilize our services!.

E-mail us your order or inquiry at [email protected]. Please come back soon and visit us.

This page hosted by Get your own peptides, proteins, amino acids, antibodies, resins, nucleic acids, pharmaceuticals, organic molecules, reagents, GMP, GLP, ISO, ICH, research, production, peptide, protein, amino acid, antibody, resin, nucleic acid, pharmaceutical, organic molecule, reagent Page